RESIDENZA 200 S
RESIDENZA 200 SD
The simple cylindrical form of RESIDENZA integrates into a wide variety of pedestrian scale applications. Cast aluminum housing with integral fitter houses electrical components. Matte acrylic lens twists and locks onto housing for tool-less relamping. Luminaire is available in single or twin configurations. Fabricated steel bracket for twin mounting is hot-dip galvanized prior to painting. Stepped steel pole with double welded transition and flush handhole is hot-dip galvanized prior to being finished in finely textured paint. Base cover is spun aluminum. All hardware is stainless steel.
RESIDENZA WALL MOUNT
RESIDENZA 200 S LED
Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access to the electrical compartment. Luminaire is available in single or twin mount configurations. Electrical gear is located in the luminaire base.
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward through the main luminaire lens of matte acrylic to provide effective horizontal and vertical illumination.
LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.
LED DELIVERED LUMENS / BUG RATING
3000K = 4918 lms / B1-U5-G3
4000K = 6098 lms / B2-U5-G3
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' overall with 3' step or 12' overall with 4' step.
Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' overall with 3' step or 12' overall with 4' step.
Optional twin mount bracket assembly is fabricated from steel, then hot-dip galvanized. Insertion depth is 4". Assembly slip fits 3" O.D. pole and is secured with two rows of three 8mm stainless steel setscrews. Bracket assembly ships pre-wired with fish tape.
Single and twin 24" banner arm assemblies available upon request. Banner arm assemblies consist of upper fixed arm and lower breakaway arm for high-wind conditions. Stainless steel lanyard inside lower arm safely retains the arm in event of breakaway.
Housing is cleaned ultrasonically prior to painting. Standard Primar® finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.
SO - Standard Output
30K - 3000K | 40K - 4000K
DIM - 0-10v Dimming
UNV - 120-277V
S - Single Luminaire | D - Twin Luminaire
10 - 10' Pole w/ 3' Step | 12 - 12' Pole w/ 4' Step | XX* - Other (*Specify height in FT)
A - Aluminum | S - Steel
BC - Base Cover
MK - Mounting Kit (Anchor Bolts and Template)
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
GFCI - GFCI Receptacle | HSS - House Side Shield | TVSS20 - 20KV Surge Suppressor