top of page

ILLUMINATING
COLUMN

RESIDENZA

RESIDENZA 200 SZ

RESIDENZA 200 SZ

RESIDENZA Z

RESIDENZA Z

The slender cylindrical form of the RESIDENZA SZ column adds a subtle styling element to pedestrian areas. The extruded aluminum shaft with flush hand hole transitions seamlessly to the cast aluminum luminaire housing. Cylindrical lens is matte acrylic. Luminaire is available with LED or ceramic metal halide light sources. Luminaire and column are finished in finely textured paint. The illuminating column is available in flanged or flangeless models. All hardware is stainless steel.

RESIDENZA FAMILY

RESIDENZA POLE MOUNT

RESIDENZA POLE MOUNT

RESIDENZA WALL MOUNT

RESIDENZA WALL MOUNT

RESIDENZA 200 S LED
HOUSING
Luminaire base is cast aluminum and is secured to pole top with concealed hardware. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools. Satin anodized rings surround the reflector at the top of the lens compartment as a decorative element. Lens is sealed to the housing with silicone gasket.

OPTICS
LED module consists of four vertically oriented LED arrays mounted to a square profile aluminum extrusion with internal fins to produce a Type V distribution. Matte acrylic lens diffuses the individual LEDs while minimizing brightness of the diodes.

ELECTRICAL
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.

DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3

NOTE:
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

COLUMN
Aluminum column is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.196'' and is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Standard mounting is with internal flange and anchor bolts. Optional external flange with anchor bolts and base cover available on request. One-piece base cover is 0.080'' spun aluminum and finished to match the pole. Nominal column height is 14.5'

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

INGRESS PROTECTION
IP65

CERTIFICATION
CSA/US Certified for Wet Location.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

RESIDENZA 200 SZ
RESIDENZA 200 SZ

ORDER INFORMATION

Model

RS200SZ

Mounting

IF - Internal Flange  |  EF - External Flange

Height

14.5 - 14.5' Round Straight

LED Module

N/A - Not Applicable

CCT

30K - 3000K  |  40K - 4000K

Control

DIM - 0-10v Dimming

Volt

UNV - 120-277V

Distribution

T2 - Type II  |  T3 - Type III  |  T4 - Type IV  |  T5 - Type V

Finish

BL - Black  |  DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Options

GFCI - GFCI Receptacle  |  HSS - House Side Sheild  |  TVSS20 - 20KV Surge Suppressor

<product>

<oi model>

<product>

<oi model>

bottom of page