RESIDENZA S
RESIDENZA 200 S
The simple cylindrical form of RESIDENZA is available for pedestrian scale wall mounting applications. Cast aluminum housing with integral fitter houses electrical components. Matte acrylic lens twists and locks onto housing for tool-less relamping. Cleanly styled mounting arm is fabricated aluminum. Optional externally mounted decorative house side shield is available on request. All hardware is stainless steel.
RESIDENZA FAMILY
RESIDENZA S POLE MOUNT
RESIDENZA COLUMN
RESIDENZA 200 S LED
HOUSING
Luminaire base with integral fitter is cast aluminum and is secured to tenon top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. All hardware is stainless steel.
OPTICS
LED module consists of single high-power CoB LED and edge-lit cylindrical acrylic rod positioned within the matte acrylic lens. Matte acrylic lens provides diffuse illumination with low brightness.
ELECTRICAL
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Electronic LED driver supplies 700mA drive current . The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.
LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 4918 LMS / B1-U5-G3
4000K: 6098 LMS / B2-U5-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Wall mount bracket assembly is fabricated aluminum and ships prewired with fishtape.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP65
CERTIFICATION
CSA/US Certified for Wet Locations
WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.


ORDER INFORMATION
Model
RS200S
LED Module
N/A - Not Applicable
Color Temperature
30K - 3000K, 40K - 4000K
Volt
UNV - 120-277V
Distribution
N/A - Not Applicable
Mounting
W - Wall Mount
Beam
N/A - Not Applicable
Finish
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
Option
DIM - 0-10v Dimming, HSS - Houseside Shield, TVSS20 - 20KV Surge Suppressor
![]() | ![]() | ![]() | ![]() |
---|---|---|---|
![]() | ![]() |

<product>
<oi model>
