POLE
MOUNT

RESIDENZA S

RESIDENZA 200 S

RESIDENZA 200 S

RESIDENZA 200 SD

RESIDENZA 200 SD

The twin-mount cylindrical forms of RESIDENZA transition seamlessly to the square split-profile steel pole. Cast aluminum housing with integral fitter houses electrical components. Matte acrylic lens twists and locks onto housing for tool-less relamping. Steel pole with flush handhole is hot-dip galvanized prior to being finished in finely textured paint. All hardware is stainless steel.

RESIDENZA FAMILY

RESIDENZA WALL MOUNT

RESIDENZA WALL MOUNT

RESIDENZA 200 SD LED
HOUSING
Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools providing access for relamping. Luminaire is available in single or twin mount configurations. Electrical gear is located in the luminaire base.

OPTICS
LED module consists of single high-power CoB LED and edge-lit cylindrical acrylic rod positioned within the matte acrylic lens. Matte acrylic lens provides diffuse illumination with low brightness.

ELECTRICAL
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Electronic LED driver supplies 700mA drive current . The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts per luminaire or 112 watts total . Optional 0-10v dimming available on request.

DELIVERED LUMENS / BUG RATING
3000K: 4918 lumens / B1-U5-G3
4000K: 6098 lumens / B2-U5-G3

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Upper shaft of laddered steel pole and integral bracket arms are fabricated from two parallel 0.114" thick rectangular tube sections separated by horizontal steel plates welded at evenly spaced intervals along the length of the shaft. Bracket arms have integral tenon to accept luminaires. Shaft at base of pole is cold drawn over mandrel, electric-weld, mechanical square steel tubing with nominal wall thickness of 0.157". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 12'. Pole ships pre-wired with fish-tape.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

INGRESS PROTECTION: IP65

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

RESIDENZA 200 SD
RESIDENZA 200 SD

ORDER INFORMATION

Model

RS200SD

LED Module

N/A - Not Applicable

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

N/A - Not Applicable

Mounting

B - Twin Mount

Pole

12L - 12' Laddered, X - Other (Specify)

Pole Material

S - Steel

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

DIM - 0-10v Dimming, GFCI - GFCI Receptacle, HSS - House Side Shield, TVSS20 - 20KV Surge Suppressor, BA24S - 24" Single Banner Arm, BA24D - 24" Double Banner Arms

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >