®

VARELLO 485 L Wall

HOUSING
Cylindrical housing is machined from 6060 extruded aluminum alloy tubing. Upper and lower lens rings are precision machined from 6060 aluminum and sealed to the housing with one-piece die-cut closed cell silicone gaskets. Upper and lower tempered glass lenses are sealed to the lens rings with one-piece closed cell silicone gasket. Luminaire with cast aluminum bracket mounts to wall surface with factory-supplied wall anchors and hardware. All hardware is stainless steel.

OPTICS
Optics include single CoB LED with reflector and diffusing lens. Available distributions include narrow 13°, medium 27°, or wide 59° beam spreads.

ELECTRICAL
Electronic LED driver supplies 350mA drive current to LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 28 watts. Optional 0-10v DC dimming is available on request.

DELIVERED LUMENS PER LIGHT SOURCE (UP OR DOWN) / CRI = 80
3000K
13° BEAM / 1554 LMS
27° BEAM / 1491 LMS
59° BEAM / 1451 LMS

4000K
13° BEAM / 1658 LMS
27° BEAM / 1592 LMS
59° BEAM / 1547 LMS

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.