®

VARELLO 300 Wall

HOUSING
Cylindrical housing is machined from 6060 extruded aluminum alloy tubing. Semi-cylindrical front lens fits flush to the housing. Matte acrylic lens is sealed to the housing with one-piece closed cell silicone gasket and secured with six captive flathead countersunk screws. Upper and lower lens rings are precision machined from 6060 aluminum and sealed to the housing with one-piece die-cut closed cell silicone gaskets. Matte acrylic upper and lower lenses are bonded to the lens rings with silicone. Luminaire with cast aluminum bracket mounts to wall surface with factory-supplied wall anchors and hardware. All hardware is stainless steel.

OPTICS
Two linear LED boards centered within the housing direct light through the front satine’ acrylic lens to produce a soft diffused light distribution. Upper and lower lenses emit soft glow for ambience and visual interest.

ELECTRICAL
Integral high-power factor electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Power consumption is 13 watts.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 611 LUMENS / B0-U3-G1
4000K: 672 LUMENS / B0-U3-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze.Special colors available on request.

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.