®

VARELLO 220 Wall

HOUSING
Cylindrical housing is machined from 6060 extruded aluminum alloy tubing. Upper and lower lens rings are precision machined from 6060 aluminum and sealed to the housing with one-piece die-cut closed cell silicone gaskets. Upper and lower tempered glass lenses are sealed to the housing with one-piece cell silicone gaskets. Luminaire with cast aluminum bracket mounts to wall surface with factory-supplied wall anchors and hardware. All hardware is stainless steel.

OPTICS
Upper and lower optics consist of single CoB LED with reflector and clear tempered flat glass lens. Available distributions include narrow 13°, medium 27°, or wide 59° beam spreads.

ELECTRICAL
Two integral high-power factor electronic LED drivers supply 350mA drive current to the LED modules at standard output or 700mA for high output models. Input voltage range is 120v to 277v at 50/60Hz. Total power consumption is 25 watts for standard output and 50 watts for high output.

DELIVERED LUMENS (TOP AND BOTTOM LED MODULE COMBINED) / CRI = 80
3000K - STANDARD OUTPUT / HIGH OUTPUT
13° BEAM - 2914 LMS / 5828 LMS
27° BEAM - 2796 LMS / 5592 LMS
59° BEAM - 2720 LMS / 5440 LMS

4000K - STANDARD OUTPUT / HIGH OUTPUT
13° BEAM - 3108 LMS / 6216 LMS
27° BEAM - 2985 LMS / 5970 LMS
59° BEAM - 2902 LMS / 5804 LMS

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.