The VALENCIA wall mount series is available in two sizes to satisfy a variety of building scale requirements. The cast aluminum housing with integrated slipfitter anchors stainless steel rods to support the flat spun aluminum shade, creating a classic appearance. Internal louver with white finish is standard. Optional asymmetrical louver provides added light control. Cylindrical lens is clear acrylic. Steel mounting brackets are cleanly detailed and hot-dip galvanized prior to being finished in high quality paint. All hardware is stainless steel.
VALENCIA POLE MOUNT
VALENCIA 600 LED
Cylindrical post top luminaire consists of base with shade supported by four stainless steel support rods. Heavy-duty cast aluminum base with integral slip fitter anchors the support rods, and is machined to include groove for gasketing and mounting surface for the lens and ballast enclosure. Shade shall be spun aluminum and free from burrs and sharp edges. Shade and base are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire slip fits 3" O.D. pole or tenon, and has built-in stop to limit insertion depth to 3". Two offset rows of three 10mm recessed setscrews secure the luminaire to the pole. All hardware is stainless steel.
LED module is an enclosed system with vertically oriented LED arrays mounted within a cylindrical clear acrylic lens. Light shaping diffusing film on the inside of the lens controls and shapes light distribution for optimal performance while reducing glare from the individual LEDs. Thermal management is provided via heat sinking and convective cooling within the sealed system.
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 54 watts for Module 360 and 42 watts for Module 270. Optional 0-10v dimming available on request.
LED DELIVERED LUMENS / BUG RATING
3000K: 3716 lumens / B1-U4-G3
4000K: 4125 lumens / B2-U4-G3
3000K: 2787 lumens / B1-U3-G3
4000K: 3094 lumens / B1-U3-G3
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places by customer-supplied hardware. Two parallel square tubes with 3" O.D. tenon are welded to the 0.24" thick mounting plate. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships pre-wired with fish tape.
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP54
CERTIFICATION: CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
360L - Symmetric distribution, 270L - Asymmetric distribution
WW - 3000K, NW - 4000K, A - Amber, B - Blue, RB - Royal Blue, G - Green, R - Red
UNV - 120-277V
N/A - Not Applicable
D - Para Wall Bracket
N/A - Not Applicable
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
DIM - 0-10v Dimming, HSS - Houseside Shield, TVSS20 - 20KV Surge Suppressor