REVARA
REVARA
REVARA combines the best of both worlds merging sophisticated design with high functionality to satisfy the demanding needs of public spaces and architecture. High design standards work hand in hand with technical refinements to deliver understated simplicity evident over the lifetime of the luminaire. The luminaire is available in two lumen packages to satisfy pedestrian-scale and large area lighting illumination requirements and features a choice of Type II, III, and forward throw optics. A host of options includes 0-10v dimming, low profile house side shielding, surge suppression for lightning prone regions, and motion sensors. Standard PRIMAR® finshes include finely textured matte silver grey, dark grey, graphite grey, matte black, or dark bronze. Custom RAL finishes are available on request. REVARA from Hess: A luminaire that more than meets these requirements – day and night.
REVARA FAMILY
REVARA POLE MOUNT
REVARA
HOUSING
Low-profile wedge-shaped housing is die-cast from high-grade aluminum alloy. The enclosure features integrated cooling fins to enhance heat dissipation. LED lenses are sealed to the circuit boards to IP65 rating to ensure weather-tight protection. External weatherproof power cord between the slipfitter and luminaire housing is encased within a protective braided sleeve for a clean appearance. Two precision-machined magnetic brushed stainless-steel knobs conceal locking bolts on the yoke.
OPTICS
Optics includes choice of one or two LED modules. Each module consists of a field replaceable aluminum core PCB with twenty-four high-power LEDs and lensing molded from optical quality acrylic. The removable lenses are sealed to the circuit board to provide IP65 rating. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+. Luminaire efficacy is 140 lumens per watt nominal. Delivered lumen output is 4,200 lumens for single module and 8,400 lumens for models with two modules. Optional house side shielding is low profile and mounted externally over the LED engine and lenses.
ELECTRICAL
Electronic LED driver supplies 1300mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 30 watts for models with one module or 60 watts for models with two modules. Optional 0-10v DC dimming, 20KV surge suppression protection, and motion sensors are available on request.
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Mounting bracket is hot dip galvanized with coating inside and out, then lightly sanded prior to painting.
FINISH
Standard PRIMAR® finishes are finely textured dark grey, graphite grey, silver grey, black, and dark bronze. Special RAL colors available on request.
INGRESS PROTECTION: IP65
LUMINAIRE WEIGHT: 39 LBS
LUMINAIRE EPA: 0.43 SQ FT
CERTIFICATION
CSA/US Certified for Wet Locations (pending)
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
RVRALW
LED Module
1 - 1 LED Module | 2 - 2 LED Modules
Color Temperature
30K - 3000K | 40K - 4000K
Control
ON-OFF - On-Off | DIM - 0-10v Dimming
Volt
UNV - 120-277V
Distribution
T2 - Type II | T3 - Type III | T4 - Type IV
Beam
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
HSS - Houseside Shield | OCC - Occupancy Sensor | TVSS20 - 20KV Surge Suppressor
<product>
<oi model>