RESIDENZA W
RESIDENZA 200
The simple cylindrical form of RESIDENZA is available for pedestrian scale wall mount applications. Cast aluminum housing with integral fitter houses electrical components. Lens twists and locks onto housing for tool-less access. Cleanly styled mounting arm is fabricated aluminum. Optional externally mounted decorative house side shield is available on request. All hardware is stainless steel.
RESIDENZA FAMILY
RESIDENZA POLE MOUNT
RESIDENZA COLUMN
RESIDENZA 200 LVC LED
HOUSING
Luminaire base with integral fitter is cast aluminum and is secured to pole top with three recessed setscrews. Clear acrylic cylindrical lens with bonded aluminum top is secured to the housing with single stainless steel cap screw. Satin anodized rings encircle the LED module at the top of the lens compartment as a decorative element.
OPTICS
Optical assembly consists of one LEVO C LED module mounted within the cylindrical clear acrylic lens. The module consists of an aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, IV, or V optics. LED circuit boards are equipped with electrical disconnects to allow for future technology upgrades. CRI is 80+.
ELECTRICAL
Electronic LED driver supplies 700mA drive current to the LED module with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37 watts. Optional 0-10v DC dimming is available on request.
LED DELIVERED LUMENS / BUG RATING
TYPE II - 3000K: 3248 LMS / B1-U1-G1
TYPE III - 3000K: 3356 LMS / B1-U2-G1
TYPE IV - 3000K: 3261 LMS / B1-U1-G1
TYPE V - 3000K: 3542 LMS / B2-U1-G1
TYPE II - 4000K: 3456 LMS / B1-U1-G1
TYPE III - 4000K: 3571 LMS / B1-U2-G1
TYPE IV - 4000K: 3469 LMS / B1-U1-G1
TYPE V - 4000K: 3768 LMS / B2-U1-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Wall mount bracket assembly is fabricated aluminum and ships pre-wired with fish tape.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WEIGHT: 25 lbs
EPA: 1.3 SQ FT
INGRESS PROTECTION: IP65
CERTIFICATION
CSA/US Certified for Wet Locations
WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.


ORDER INFORMATION
Model
RS200
LED Module
1LVC - 1 module
Color Temperature
30K - 3000K, 40K - 4000K
Volt
UNV - 120-277V
Distribution
T2 - Type II, T3 - Type III, T4 - Type IV, T5 - Type V
Mounting
W - Wall Mount
Beam
N/A - Not Applicable
Finish
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
Option
DIM - 0-10v Dimming, HSS - Houseside Shield, TVSS20 - 20KV Surge Suppressor
![]() | ![]() | ![]() | ![]() |
---|---|---|---|
![]() | ![]() |

<product>
<oi model>
