top of page

WALL
MOUNT

MONTEGO

MONTEGO 660

MONTEGO 660

MONTEGO 800

MONTEGO 800

MONTEGO's timeless styling extends to wall mounted models. Two sizes are available to satisfy a variety of building scale requirements. The clean look of the cast aluminum housing contrasted against the curved aluminum shade and dome top creates a classically contemporary appearance. Integrated slipfitter anchors stainless steel rods to support the curved shade and cast top cap. The cylindrical clear acrylic lens extends through the shade forming an aperture to subtly highlight the luminaire night form. External louvers mimic the curvature of the shade profile, while functioning to reduce brightness. Optional internal louvers for symmetrical or asymmetrical distributions provide added light control. Steel mounting brackets are cleanly detailed and hot-dip galvanized prior to being finished in high quality paint. All hardware is stainless steel.

MONTEGO FAMILY

MONTEGO POLE MOUNT

MONTEGO POLE MOUNT

MONTEGO BOLLARD

MONTEGO BOLLARD

MONTEGO 660 Wall

HOUSING
Cylindrical post top luminaire consists of roof, shade, and external louvers with matching profiles. Four stainless steel upper support rods separate the heavyduty cast aluminum roof and spun aluminum shade, forming an aperture at the top of the luminaire. Machined lower rods support the shade and retain three spun aluminum external louvers midway along its length. Shade and louvers shall be free from burrs and sharp edges. Heavy-duty cast aluminum base with integral slip fitter anchors the support rods, and is machined to include groove for gasketing and mounting surface for the lens and ballast enclosure. Roof and base are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire slip fits 3" O.D. tenon, and has built-in stop to limit insertion depth to 2.8". Two offset rows of three 10mm recessed setscrews secure the luminaire to the pole. All hardware is stainless steel.

OPTICS
LED module is an enclosed system with vertically oriented LED arrays mounted within a cylindrical clear acrylic lens. Light shaping diffusing film on the inside of the lens controls and shapes light distribution for optimal performance while reducing glare from the individual LEDs. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 24 watts for Montego 660W and 36 watts for Montego 800W. Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
MONTEGO 660W
3000K: 4202 LMS / 24 WATTS / B1-U4-G3
4000K: 4311 LMS / 24 WATTS / B2-U4-G3

MONTEGO 800W
3000K: 5603 LMS / 36 WATTS / B1-U3-G2
4000K: 5748 LMS / 36 WATTS / B1-U3-G2

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Two parallel square tubes with 3" O.D. tenon are welded to the 0.24" thick mounting plate. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships pre-wired with fish tape.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT: 29 lbs

EPA: 1.9 SQ FT

INGRESS PROTECTION: IP54

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.

MONTEGO 660
MONTEGO 660

ORDER INFORMATION

Model

MT660W

LED Module

Color Temperature

30K - 3000K  |  40K - 4000K

Control

ON-OFF - On-Off  |  DIM - 0-10v Dimming

Volt

UNV - 120-277V

Distribution

N/A - Not Applicable

Beam

N/A - Not Applicable

Finish

BL - Black  | DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Option

HSS - Houseside Shield  |  TVSS20 - 20KV Surge Suppressor

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title

<product>

<oi model>

<product>

<oi model>

bottom of page