WALL
MOUNT

CAMPONE

CAMPONE 810

CAMPONE 810

CAMPONE captures tasteful European styling with design simplicity and graceful form. The slender conical luminaire with acrylic lens tapers down to match the tenon base with a subtle reveal at the transition. Cast aluminum housing with integral fitter secures to the wall bracket with regressed setscrews. The facetted reflector is formed from high-reflectance pre-anodized aluminum with a textured micro-surface to efficiently distribute light and minimize brightness. Available distributions include symmetric and asymmetric light patterns. A decorative fascia surrounding the reflector is perforated stainless steel. Luminaire and bracket are finished in finely texture paint. All hardware is stainless steel.

CAMPONE FAMILY

CAMPONE POLE MOUNT

CAMPONE POLE MOUNT

CAMPONE 810 LVC
HOUSING
Luminaire housing with integral fitter is cast aluminum. Four vertical rods fastened to the housing support the optical system and act as a wire way to provide power to the LED circuit board. Conical lens is clear acrylic and sealed with one-piece silicone gaskets to provide a weather tight seal when closed. Roof is spun aluminum. A stainless steel thumbscrew secures the roof, allowing tool-less access to the luminaire. Luminaire mounts to tenon on pole and secured with two offset rows of three regressed setscrews. Luminaire slip fits over 3" OD tenon with insertion depth of 4.2". All hardware is stainless steel.

OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / BUG RATING
3000K
TYPE 2 = 3248 LMS / B1-U1-G1
TYPE 3 = 3356 LMS / B1-U2-G1
TYPE 4 = 3261 LMS / B1-U1-G1
TYPE 5 = 3542 LMS / B2-U1-G1

4000K
TYPE 2 = 3456 LMS / B1-U1-G1
TYPE 3 = 3571 LMS / B1-U2-G1
TYPE 4 = 3469 LMS / B1-U1-G1
TYPE 5 = 3768 LMS / B2-U1-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for current technical data.

MOUNTING
Fabricated steel mounting bracket mounts over junction box and is secured to wall in four places.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.

WEIGHT: 25 lbs

INGRESS PROTECTION: IP65

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.

CAMPONE 810
CAMPONE 810

ORDER INFORMATION

Model

CP810

LED Module

1LVC - 1 module

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

T2 - Type II, T3 - Type III, T4 - Type IV, T5 - Type V

Mounting

W - Wall Mount

Beam

N/A - Not Applicable

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

DIM - 0-10v Dimming, HSS - Houseside Shield, TVSS20 - 20KV Surge Suppressor

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >