®

DESCRIPTION

STAGE TWO introduces basic customization capability, where individual modules may be oriented at any point 360° around the column. Luminaire aiming is factory set and fixed in place. Modular options are accent, ambient, area, key, and unique, with varying optical distributions. Each module of four luminaires is controllable through 0-10v dimming or simple on/off switching. STAGE TWO columns may be configured with one to five modules, up to a maximum height of 27’.

​

HOUSING
Individual luminaire housings are die-cast aluminum. The diameter of the aperture is 3.1". Flat lens is clear tempered glass. The mounting bracket for attachment of the luminaire to the column inserts is fabricated from 1/8" aluminum sheet and welded into place. Four spot luminaires are provided for each insert and are finished in finely textured black Primar® paint. Custom RAL colors are available on request.

The column shaft is extruded 6061 T6 aluminum with nominal diameter of 7 7/8” and thickness of 3/16”. The shaft may accomodate one to five luminaiare modules, each with inserts containing four pre-aimed luminaires with factory-set aiming angles. The handhole at the base of the shaft is oriented at 0° horizontal inline with one of four anchor bolts. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device.

Nominal column height is based on order selection, from 16' to 26'. Depending on the number of modules, the base column shaft height varies with the desired column height. Minimum base column shaft height is 3 meters (9.84'). Maximum base column shaft height is 7 meters (22.97'). Module height is 39.72". Column includes 8.07" top element which houses additional electrical components.

OPTICS
Solid-state LED light source is available in 2700K, 3000K, or 4000K color temperatures with CRI > 80. Optical choices for the assembled column include accent, ambient, area, key, or unique light distributions with various pre-aimed luminaire orientations and a combination of 19° and 24° luminaires. See page 11 for further information.

ELECTRICAL
Modules are pre-wired for ease of installation. Each module containing four luminaires operates from single driver. Universal LED drivers are mounted in a weather-proof enclosure at the rear of the insert.

Input voltage to universal driver is 120v through 277v AC, 50/60 Hz. Power consumption is 24 watts per module. Drive current is 500mA. Modules can be individually controlled via On/Off switching or 0-10v dimming.

DELIVERED LUMEN OUTPUT / EFFICACY / POWER CONSUMPTION PER LUMINAIRE
19° Spot: 720 lumens / 120 lumens per watt / 6 watts per luminaire
24° Wash: 609 lumens / 101.5 lumens per watt / 6 watts per luminaire

MOUNTING
Internal Flange is available for columns 16' or less. Internal flange includes four hot-dip galvanized anchor bolts (Ø5/8" x 18" x 3") with two leveling nuts and washers per bolt.

External Flange with Base Cover is available on all column heights. 3" base cover is fabricated aluminum and is finished to match column. Four hot-dip galvanized anchor bolts are included with two leveling nuts and washers per bolt.

External Flange with Soil Insert for embedment into concrete foundations is available on all column heights. Column mounts to fabricated steel soil insert. Soil insert is hot-dip galvanized prior to painting for long term corrosion protection. All hardware is stainless steel. Anchor bolts or soil insert may be shipped in advance upon request.

FINISH
Standard Primar® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.

CERTIFICATION & WARRANTY
CSA/US Certified for Wet Locations (Pending). Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.