®

SERA 600 SG LVC
HOUSING
One-piece luminaire housing and fitter are die-cast aluminum. Housing includes compartment for LED optical system and driver. Hinged frameless tempered glass lens is sealed to the housing with one-piece profiled silicone gasket when closed and secured with a single latch assembly. Formed aluminum door latch is flush to the housing when closed and provides tool-less access to the field replaceable LED light engine and driver. Luminaire side mounts to 2'' pipe size bracket and is secured with two setscrews. Luminaire tilt angle may be adjusted from 0° to 15° in five degree increments. All hardware is stainless steel.

OPTICS
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMENS / BUG RATING
3000K 2 Modules:
Type II = 5068 LMS / B1-U0-G1
Type III = 5126 LMS / B1-U0-G1
Type IV = 4639 LMS / B1-U0-G1

3000K 3 Modules:
Type II = 7602 LMS / B1-U0-G1
Type III = 7689 LMS / B2-U0-G1
Type IV = 6959 LMS / B2-U0-G1

4000K 2 Modules:
Type II = 5398 LMS / B1-U0-G1
Type III = 5459 LMS / B2-U0-G1
Type IV = 4941 LMS / B1-U0-G1

4000K 3 Modules:
Type II = 8096 LMS / B2-U0-G1
Type III = 8189 LMS / B2-U0-G1
Type IV = 7411 LMS / B2-U0-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Fabricated aluminum bracket arm bolts to the pole 2.5' from the top with stainless steel fasteners. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Pole curvature projects centerline of pole top 1.7' from the base. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole. Nominal pole height is 17'.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.