POLE
MOUNT

NOVARA

NOVARA ML

NOVARA ML

NOVARA S

NOVARA S

NOVARA SAL

NOVARA SAL

NOVARA SL

NOVARA SL

Simplified styling of the venerable NOVARA SAL streamlines the luminaire to complement contemporary architecture. The angular cast aluminum housing with distinctive cooling fins is accented with polished stainless steel mounting knobs. Frameless tempered glass lens with two quarter-turn fasteners allows for tool-less relamping. Mounting bracket is fabricated steel and available in single or twin configurations. Straight round pole with flush handhole is available in steel or aluminum. Steel pole and mounting bracket are hot-dip galvanized prior to being finished in finely textured paint. All hardware is stainless steel.

NOVARA FAMILY

NOVARA WALL MOUNT

NOVARA WALL MOUNT

NOVARA BOLLARD

NOVARA BOLLARD

NOVARA SAL 450 LVC
HOUSING
Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Frameless tempered glass lens is sealed with closed cell silicone gasketing when closed. Hinged lens is retained by two quarter turn fasteners for tool-less access. Braided stainless steel line houses weatherproof electrical cord, terminating in watertight couplings at both ends. Housing is adjustable to 0°, 10°, 20°, 30°, or 40° above horizontal by means of two precision machined polished stainless steel knobs and locked into place with two regressed locking bolts. Hot-dip galvanized steel mounting bracket with integral slip fitter for 2 3/8'' O.D. tenon has two offset rows of three stainless steel setscrews to secure and level luminaire to the pole.

OPTICS
Optics includes one LED module. The module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 36 watts for models with one module, 72 watts for models with two modules, or 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMEN OUTPUT / BUG RATING
3000K 1 Module:
Type II: 2534 lumens / B1-U0-G0
Type III: 2563 lumens / B1-U0-G0
Type IV: 2320 lumens / B1-U0-G0

3000K 2 Modules:
Type II: 5068 lumens / B1-U0-G1
Type III: 5126 lumens / B1-U0-G1
Type IV: 4639 lumens / B1-U0-G1

3000K 3 Modules:
Type II: 7602 lumens / B1-U0-G1
Type III: 7689 lumens / B2-U0-G1
Type IV: 6959 lumens / B2-U0-G1

4000K 1 Module:
Type II: 2699 lumens / B1-U0-G0
Type III: 2730 lumens / B1-U0-G1
Type IV: 2470 lumens / B1-U0-G1

4000K 2 Modules:
Type II: 5398 lumens / B1-U0-G1
Type III: 5459 lumens / B2-U0-G1
Type IV: 4941 lumens / B1-U0-G1

4000K 3 Modules:
Type II: 8096 lumens / B2-U0-G1
Type III: 8189 lumens / B2-U0-G1
Type IV: 7411 lumens / B2-U0-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Straight round steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.177''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Tenon is machined and inserted into the pole shaft then plug welded, showing no visible weld at the transition. Shaft is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080'' spun aluminum and finished to match the pole. Pole is 20' overall nominal height.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

INGRESS PROTECTION: IP65

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

NOVARA
NOVARA SAL

ORDER INFORMATION

Model

NV450SAL/P

LED Module

1LVC - 1 module, 2LVC - 2 modules, 3LVC - 3 modules

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

T2 - Type II, T3 - Type III, T4 - Type IV

Mounting

A - Single Mount, B - Twin Mount

Pole

20RS - 20' Round Straight

Pole Material

S - Steel

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

DIM - 0-10v Dimming, GFCI - GFCI Receptacle, HSS - House Side Shield, TVSS20 - 20KV Surge Suppressor

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >