®

NOVARA 450 ML Wall

HOUSING
Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Frameless tempered glass lens is sealed with closed cell silicone gasketing when closed. Hinged lens is retained by two quarter turn fasteners for tool-less access. Braided stainless steel line houses weatherproof electrical cord, terminating in watertight couplings at both ends. Housing is adjustable to 0°, 10°, 20°, 30°, or 40° above horizontal by means of two precision machined polished stainless steel knobs and locked into place with two regressed locking bolts.

OPTICS
Optics includes one LED module. The module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 37watts. Optional 0-10v DC dimming is available on request.

LED DELIVERED LUMENS / BUG RATING
TYPE II - 3000K: 2534 LMS / B1-U0-G0
TYPE III - 3000K: 2563 LMS / B1-U0-G0
TYPE IV - 3000K: 2320 LMS / B1-U0-G0

TYPE II - 4000K: 2699 LMS / B1-U0-G0
TYPE III - 4000K: 2730 LMS / B1-U0-G0
TYPE IV - 4000K: 2470 LMS / B1-U0-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.

FINISH
Housing is ultrasonically cleaned prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT: 25 lbs

EPA: 0.33 SQ FT

INGRESS PROTECTION: IP65

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.