®

LINEA G2 800 LVC
HOUSING
Rectangular luminaire housing with integral fitter is extruded 6061 aluminum with T6 temper and shows no visible welds. Individual LED arrays are sealed by the lens and a one-piece silicone gasket making a weather tight modular assembly. Luminaire mounts to tenon on pole and secured with four socket head cap screws on top of the housing. Luminaire is available in single or twin back-to-back mounting configurations. All hardware is stainless steel.

OPTICS
Optics include 3 or 4 individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+. Optional house side shields for the individual modules are available on request.

LED DELIVERED LUMEN OUTPUT / BUG RATING
4 Modules: 144 watts
Type II - 3000k: 14370 lms / B3-U0-G3
Type III - 3000k: 14392 lms / B3-U0-G3
Type IV - 3000k: 13662 lms / B3-U0-G3

Type II - 4000k: 15577 lms / B3-U0-G3
Type III - 4000k: 15601 lms / B3-U0-G3
Type IV - 4000k: 14809 lms / B3-U0-G3

LED DELIVERED LUMEN OUTPUT / BUG RATING
4 Modules w/ House Side Shield: 144 watts
Type II - 3000k: 13628 lms / B2-U0-G2
Type III - 3000k: 13610 lms / B2-U0-G2
Type IV - 3000k: 12814 lms / BB2-U0-G2

Type II - 4000k: 14773 lms / B2-U0-G2
Type III - 4000k: 14753 lms / B2-U0-G2
Type IV - 4000k: 13890 lms / B3-U0-G3

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

ELECTRICAL
Each LED module is driven by an independent electronic driver. Input voltage range is 120v through 277v at 50/60Hz. Each driver supplies 700mA drive current to its respective LED module. Power consumption for models with three modules is 108 watts and 144 watts for models with four LED light engines. Optional 0-10v DC dimming is available on request.

LUMINAIRE WEIGHT: 26 lbs.

LUMINAIRE EPA: 1.6 sq. ft

POLE:
Straight rectangular pole is 6.3" x 4.7" nominal and manufactured from cold drawn over mandrel, electric-weld, mechanical rectangular steel tubing with nominal wall thickness of 0.197''. Sides of shaft are flat with 3/8" radius corners. Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/16'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 26'.

FINISH:
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION: CSA Certified for Wet Locations

INGRESS PROTECTION: IP65

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.