®

LINEA 950 Wall

HOUSING
Rectangular luminaire housing is extruded aluminum showing no visible welds. Lens seals to the housing with one-piece silicone gasketing. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to surface in four places with hardware provided by others based on wall installation conditions. All hardware is stainless steel.

OPTICS
Optics consist of an LED module with field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

ELECTRICAL
Electronic LED driver supplies 350mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request. Power consumption is 16 watts.

LED DELIVERED LUMENS / BUG RATING
TYPE II - 3000K: 1267 LUMENS / B0-U0-G0
TYPE III - 3000K: 1281 LUMENS / B1-U0-G0
TYPE IV - 3000K: 1160 LUMENS / B0-U0-G0

TYPE II - 4000K: 1349 LUMENS / B0-U0-G0
TYPE III - 4000K: 1365 LUMENS / B1-U0-G0
TYPE IV - 4000K: 1235 LUMENS / B0-U0-G0

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Standard finishes are finely textured dark grey, graphite grey, silver grey, black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA Certified For Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer’s limited warranty.