MONTEGO
MONTEGO 660
MONTEGO 800
Montego's timeless styling blends with a broad range of architecture. The clean look of the cast aluminum housing contrasted against the curved aluminum shade and dome top creates a classically contemporary appearance. Integrated pole top fitter anchors stainless steel rods to support the curved shade and cast top cap. The cylindrical clear acrylic lens extends through the shade forming an aperture to subtly highlight the luminaire night form. External louvers mimic the curvature of the shade profile, while functioning to reduce brightness. Signature stepped pole with flush handhole and double welded transition is available in steel or aluminum. Steel poles and mounting brackets for twin mount are hot-dip galvanized prior to being finished in high quality paint. Base cover is spun aluminum. All hardware is stainless steel.
MONTEGO FAMILY
MONTEGO WALL MOUNT
MONTEGO 800 LED
HOUSING
Cylindrical post top luminaire consists of roof, shade, and external louvers with matching profiles. Four stainless steel upper support rods separate the heavy-duty cast aluminum roof and spun aluminum shade, forming an aperture at the top of the luminaire. Machined lower rods support the shade and retain three spun aluminum external louvers midway along its length. Shade and louvers shall be free from burrs and sharp edges. Heavy-duty cast aluminum base with integral slipfitter anchors the support rods, and is machined to include groove for gasketing and mounting surface for the lens and ballast enclosure. Roof and base are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire slipfits 3" O.D. pole or tenon, and has built-in stop to limit insertion depth to 3.5". Two offset rows of three 10mm recessed setscrews secure the luminaire to the pole. All hardware is stainless steel.
OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.
ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.
LED DELIVERED LUMENS / BUG RATING
MODULE 360
3000K: 2774 LMS / B1-U3-G2
4000K: 3080 LMS / B1-U4-G2
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
POLE
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.126". Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Specify 10' pole with 3' step, or 12' or 14' poles with 4' step height.
Stepped aluminum pole is manufactured from extruded 6061-T6 aluminum alloy. Upper shaft is 3" OD with 0.188" wall thickness. Lower shaft is 4.5" OD with 0.237" wall thickness. Machined aluminum transition is plug- and circumferentially welded to both shafts. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangulartamper-resistant locking device.
Twin mount bracket assembly is fabricated from steel, then hot-dip galvanized. Slip fitter has inner steel sleeve which acts a stop to limit insertion depth to 7.8". Assembly slip fits 3.25" O.D. pole and is secured with two rows of four 10mm stainless steel setscrews. Twin pairs of parallel square steel tubing are welded to connect the slip fitter to the individual tenons for fixture mounting. Bracket assembly ships pre-wired with fish tape.
Single and twin 24" banner arm assemblies available upon request. Banner arm assemblies consist of upper fixed arm and lower breakaway arm for high-wind conditions. Stainless steel lanyard inside lower arm safely retains the arm in event of breakaway.
FINISH
Standard Primar® finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.
INGRESS PROTECTION: IP54 LUMINAIRE WEIGHT: 55 LBS LUMINAIRE EPA: 2.7 SQ FT
CERTIFICATION
UL listed for Wet Locations
WARRANTY
Limited product warranty period including the LEDs is three years. Lamb and ballast shall carry the respective manufacturer's limited warranty.
ORDER INFORMATION
Model
MT800
LED Module
Color Temperature
30K - 3000K | 40K - 4000K
Control
DIM - 0-10v Dimming
Voltage
UNV - 120-277V
Optics
Mounting
S - Single Luminaire | D - Twin Luminaire
Pole Height
10 - 10' pole w/ 3' step | 12 - 12' pole w/ 4' step | 14 - 14' pole w/ 4' step | XX* - Other (*Specify height in Ft)
Pole Material
A - Aluminum | S - Steel
Output
SO - Standard Output
Base Cover
BC - Base Cover
Installation
MK - Mounting Kit (Anchor Bolts and Template)
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Options
GFCI - GFCI Receptacle | HSS - House Side Shield | TVSS20 - 20KV Surge Suppressor