Contemporary LED pole mounted luminaire for public spaces where clean minimalist styling is desired. Concealed hardware and unique styling cues through two prominent reveals highlight the shallow profile of the extruded aluminum housing. Luminaire is available with up to 3 LED modules in a choice of three asymmetric distributions. Dalvik is available on 15' or 20' four-inch diameter poles in aluminum or steel. Steel poles are hot-dip galvanized prior to painting for proven long-term corrosion protection. Exclusive PRIMAR is available in finely textured matte silver grey, dark grey, graphite grey, black, or bronze. Custom RAL colors available on request. All hardware is stainless steel.
DALVIK WALL MOUNT
Luminaire housing, cover, and slipfitter are cast aluminum. Luminaire cover provides top access to electrical components and optics. Flat lens with decorative screen-printing is clear tempered glass and bonded to housing with silicone for a weather tight seal. Brushed stainless steel fascia surrounds the luminaire for aesthetic appearance. Housing is fitted with stainless steel weather-tight strain relief bushing for power cable exiting rear of the luminaire. Luminaire slipfitter mounts to the pole top tenon, maintaining a consistent outside diameter in the transition to the pole. All hardware is stainless steel.
Optics include choice of two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions are available as a Type II, Type III, or Type IV. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. Optional house side shield available on request.
LED DELIVERED LUMEN OUTPUT / BUG RATING
2 Modules: 72 watts
Type II - 3000K: 6794 lumens / B1-U0-G1
Type III - 3000K: 6459 lumens / B2-U0-G1
Type IV - 3000K: 6078 lumens / B1-U0-G1
Type II - 4000K: 7377 lumens / B2-U0-G1
Type III - 4000K: 7013 lumens / B2-U0-G1
Type IV - 4000K: 6599 lumens / B1-U0-G2
3 Modules: 108 watts
Type II - 3000K: 10191 lumens / B2-U0-G1
Type III - 3000K: 9689 lumens / B2-U0-G2
Type IV - 3000K: 9117 lumens / B2-U0-G2
Type II - 4000K: 11065 lumens / B2-U0-G1
Type III - 4000K: 10520 lumens / B2-U0-G2
Type IV - 4000K: 9899 lumens / B2-U0-G2
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
Straight round pole is manufactured from cold drawn over mandrel, electric weld, mechanical steel tubing with nominal wall thickness of 0.142". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and include triangular tamper-resistant locking device. Nominal pole heights are 15' or 20'.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request
0.33 sq ft
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
2LVC - 2 modules, 3LVC - 3 modules
30K - 3000K, 40K - 4000K
UNV - 120-277V
T2 - Type II, T3 - Type III, T4 - Type IV
A - Single Mount
15RS - 15' Round Straight, 20RS - 20' Round Straight
S - Steel, A - Aluminum
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
3PR - 3-pin NEMA photocontrol receptacle, 5PR - 5-pin NEMA photocontrol receptacle, 7PR - 7-pin NEMA photocontrol receptacle, DIM - 0-10V Dimming, GFCI - GCFI receptacle, HSS - House Side Shield, MS - Motion Sensor, TVSS20 - 20KV Surge Suppressor