top of page

POLE
MOUNT

DALVIK

DALVIK S

DALVIK S

DALVIK R

DALVIK R

Contemporary LED pole mounted luminaire for public spaces where clean minimalist styling is desired. Concealed hardware and unique styling cues through two prominent reveals highlight the shallow profile of the extruded aluminum housing. Luminaire is available with up to 3 LED modules in a choice of three asymmetric distributions. Dalvik is available on 15' or 20' four-inch diameter poles in aluminum or steel. Steel poles are hot-dip galvanized prior to painting for proven long-term corrosion protection. Exclusive PRIMAR is available in finely textured matte silver grey, dark grey, graphite grey, black, or bronze. Custom RAL colors available on request. All hardware is stainless steel.

DALVIK FAMILY

DALVIK WALL MOUNT

DALVIK WALL MOUNT

DALVIK S
HOUSING
Luminaire housing is extruded aluminum with cast aluminum fitter. Access door is secured to the luminaire with single quarter-turn fastener to provide access to the electrical gear and optics. Luminaire slip fitter mounts to the tenon on 4" OD pole and is secured with two offset rows of three recessed setscrews, maintaining a consistent outside diameter at the transition to the pole. Luminaire is available in single or twin mount configurations. Contact factory for mounting to alternate pole diameters. All hardware is stainless steel.

OPTICS
Optics include choice of one, two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions are available as a Type II, Type III, or Type IV. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. Optional house side shielding available on request.

ELECTRICAL
Each LED module is driven by an independent electronic LED driver, which supplies 700mA drive current to the LED aluminum core circuit board. Universal input voltage range 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 36 watts per module, for total power consumption of 36 watts for one module, 72 watts for two modules, or 108 watts for three modules. Optional 0-10v dimming available on request.

LED DELIVERED LUMEN OUTPUT / BUG RATING
1 Module: 36 watts
TYPE II - 3000K: 3593 LMS / B2-U0-G2
TYPE III - 3000K: 3598 LMS / B2-U0-G2
TYPE IV - 3000K: 3092 LMS / B2-U0-G2

TYPE II - 4000K: 3895 LMS / B2-U0-G2
TYPE III - 4000K: 3900 LMS / B2-U0-G2
TYPE IV - 4000K: 3703 LMS / B2-U0-G2

2 Modules: 72 watts
TYPE II - 3000K: 7185 LMS / B2-U0-G2
TYPE III - 3000K: 7196 LMS / B2-U0-G2
TYPE IV - 3000K: 6183 LMS / B2-U0-G2

TYPE II - 4000K: 7789 LMS / B2-U0-G2
TYPE III - 4000K: 7800 LMS / B2-U0-G2
TYPE IV - 4000K: 7405 LMS / B2-U0-G2

3 Modules: 108 watts
TYPE II - 3000K: 10,778 LMS / B2-U0-G2
TYPE III - 3000K: 10,794 LMS / B2-U0-G2
TYPE IV - 3000K: 9275 LMS / B2-U0-G2

TYPE II - 4000K: 11,684 LMS / B2-U0-G2
TYPE III - 4000K: 11,700 LMS / B2-U0-G2
TYPE IV - 4000K: 11,108 LMS / B2-U0-G2

1 Module w/ House Side Shield: 36 watts
TYPE II - 3000K: 3407 LMS / B1-U0-G1
TYPE III - 3000K: 3403 LMS / B2-U0-G1
TYPE IV - 3000K: 3204 LMS / B1-U0-G2

TYPE II - 4000K: 3693 LMS / B1-U0-G2
TYPE III - 4000K: 3689 LMS / B2-U0-G1
TYPE IV - 4000K: 34730 LMS / B1-U0-G2

2 Modules w/ House Side Shield: 72 watts
TYPE II - 3000K: 6814 LMS / B1-U0-G1
TYPE III - 3000K: 6805 LMS / B2-U0-G1
TYPE IV - 3000K: 6407 LMS / B1-U0-G2

TYPE II - 4000K: 7386 LMS / B1-U0-G2
TYPE III - 4000K: 7377 LMS / B2-U0-G1
TYPE IV - 4000K: 6945 LMS / B1-U0-G2

3 Modules w/ House Side Shield: 108 watts
TYPE II - 3000K: 10,221 LMS / B1-U0-G1
TYPE III - 3000K: 10,208 LMS / B2-U0-G1
TYPE IV - 3000K: 9611 LMS / B1-U0-G2

TYPE II - 4000K: 11,079 LMS / B1-U0-G2
TYPE III - 4000K: 11,066 LMS / B2-U0-G1
TYPE IV - 4000K: 10,418 LMS / B1-U0-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Straight round 4" OD pole is manufactured from cold drawn over mandrel, electric weld, mechanical steel tubing with nominal wall thickness of 0.142". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Nominal pole heights are 15' or 20'.

FINISH
Standard Primarâ„¢ finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.

INGRESS PROTECTION
IP65

LUMINAIRE WEIGHT
19 LBS

LUMINAIRE EPA
0.33 SQ FT

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.

DALVIK
DALVIK S

ORDER INFORMATION

Model

DAL650S

LED Module

1 - 1 module  |  2 - 2 modules  |  3 - 3 modules

Color Temperature

30K - 3000K  |  40K - 4000K

Control

DIM - 0-10v Dimming

Voltage

UNV - 120-277V

Optics

T2 - Type II  |  T3 - Type III  |  T4 - Type IV  |  T5 - Type V

Mounting

S - Single  |  D - Twin

Pole Height

15 - 15' Round Straight  |  20 - 20' Round Straight  |  XX* - Other (*Specify in feet)

Pole Material

A - Aluminum  |  S - Steel

Base Cover

BC - Base Cover

Installation

MK - Mounting Kit (Anchor Bolts and Template)

Finish

BL - Black  |  DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Options

HSS - House Side Shield  |   TVSS20 - 20KV Surge Suppressor  |  GFCI - GCFI receptacle  |  MS - Motion Sensor  |  3PR - 3-pin NEMA photocontrol receptacle  |  7PR - 7-pin NEMA photocontrol receptacle

<product>

<oi model>

<product>

<oi model>

bottom of page