POLE
MOUNT

AVALON T

AVALON T 650

AVALON T 650

AVALON T 800

AVALON T 800

AVALON's clean, functional styling is available as a pendant mount in single or twin configurations. Two sizes meet diverse proportional requirements. The pendant mounted cast top cap anchors stainless steel rods to support the flat spun aluminum shade and lower lens ring. The cylindrical clear acrylic lens extends through the shade forming an aperture to subtly highlight the luminaire night form. External louvers mimic the shade profile, while functioning to reduce brightness. Optional internal louvers for symmetrical or asymmetrical distributions provide added light control. Lateral elements of the mounting arm are constructed of angled steel and are supported by tubular steel rods. Mounting arm assembly slipfits the pole. Signature stepped pole with flush handhole is available in steel or aluminum. Steel pole is hot-dip galvanized prior to being finished in finely textured paint. Base cover is spun aluminum. All hardware is stainless steel.

AVALON FAMILY

AVALON WALL MOUNT

AVALON WALL MOUNT

AVALON 800 LED
HOUSING
Cylindrical pendant mounted luminaire consists of roof, shade, and external louvers with matching profiles. Four stainless steel upper support rods separate the heavy-duty cast aluminum roof and spun aluminum shade, forming an aperture at the top of the luminaire. Machined lower rods support the shade and retain three spun aluminum external louvers midway along its length. Shade and louvers shall be free from burrs and sharp edges. Lower support rods terminate in two aluminum lens rings, machined to include groove for gasketing and mounting surface for the cylindrical and bottom acrylic lenses. Roof and lens rings are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire mounts to bracket with threaded brass nipple and is locked in place with recessed setscrews on the bracket and luminaire roof. All hardware is stainless steel.

OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / BUG RATING
Module 360
3000K: 2774 lumens / B1-U3-G2
4000K: 3080 lumens / B1-U4-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

POLE
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142". Pole shall show no seam along shaft. Flush mounted handhole cover is plasma cut with kerf not to exceed 1 /8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded for bonding of paint. Base cover is one-piece 0.080" spun aluminum and finished to match the pole. Nominal pole height is 16'.

Fabricated steel bracket assembly is available in single or twin configurations. Upper shaft of the bracket assembly is sized to match the upper pole shaft, and is welded to the top of the sli pfitter. Slip fitter insertion depth is 7.87". Slip fitter has two rows of four 8mm stainless steel setscrews to secure bracket to the pole. Steel rod with sleeving is welded to the top of the bracket assembly and serves as a wire way to supply power to the luminaire. Sleeving has radiussed inside edges to prevent damage to wiring. Steel rod terminates in fabricated steel luminaire attachment point. Two horizontal angled steel bars are welded to the attachment point and slip fitter. Bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships prewired with fish tape.

Single and twin 24" banner arm assemblies available upon request. Banner arm assemblies consist of upper fixed arm and lower breakaway arm for high-wind conditions. Stainless steel lanyard inside lower arm safely retains the arm in event of breakaway.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard PRIMAR® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.

CERTIFICATION
UL Listed for Wet Locations

INGRESS PROTECTION
IP54

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

AVALON T 800
AVALON T 800

ORDER INFORMATION

Model

AV800T

LED Module

360L - Symmetric distribution

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

N/A - Not Applicable

Mounting

A - Single Mount, B - Twin Mount

Pole

16S - 16' Stepped, 21S - 21' Stepped, X - Other (Specify)

Pole Material

S - Steel

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

DIM - 0-10v Dimming, GFCI - GFCI Receptacle, HSS - House Side Shield, TVSS20 - 20KV Surge Suppressor, BA24S - 24" Single Banner Arm, BA24D - 24" Double Banner Arms

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >