®

AVALON 650 Wall

HOUSING
Cylindrical post top luminaire consists of roof, shade, and external louvers with matching profiles. Four stainless steel upper support rods separate the heavyduty cast aluminum roof and spun aluminum shade, forming an aperture at the top of the luminaire. Machined lower rods support the shade and retain three spun aluminum external louvers midway along its length. Shade and louvers shall be free from burrs and sharp edges. Heavy-duty cast aluminum base with integral slip fitter anchors the support rods, and is machined to include groove for gasketing and mounting surface for the lens and ballast enclosure. Roof and base are gasketed to provide a weather-tight seal to the clear acrylic cylindrical lens. Luminaire slip fits 3" O.D. tenon, and has built-in stop to limit insertion depth to 3" (650W Model) or 3.5" (800W Model). Two offset rows of three 10mm recessed setscrews secure the luminaire to the pole. All hardware is stainless steel.

OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts (Avalon 650W) or 36 watts (Avalon 800W). Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / BUG RATING
AVALON 650W
3000K: 4202 LMS / 24 WATTS / B1-U4-G3
4000K: 4311 LMS / 24 WATTS / B2-U4-G3

AVALON 800W
3000K: 5603 LMS / 36 WATTS / B1-U3-G2
4000K: 5748 LMS / 36 WATTS / B1-U3-G2

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places by customer-supplied hardware. Two parallel square tubes with 3" O.D. tenon are welded to the 0.24" thick mounting plate. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships prewired with fishtape.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finishes are finely textured dark grey, graphite grey, silver grey, black, and dark bronze. Special RAL colors available on request.

WEIGHT: 29 lbs

EPA: 1.9 SQ FT

INGRESS PROTECTION: IP54

CERTIFICATION
UL Listed for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.