LEDIA LF
LEDIA LF
LEDIA LF RGB
The LEDIA LF series for recessed inground use transforms night environments into colorful settings- walkways and public spaces develop atmosphere and interiors inherit structure. Luminaire is available in four sizes. Specially coated tempered glass tiles diffuse light uniformly across the surface. Functional anti-slip squares applied to the surface also create interest by adding a unique three-dimensional effect to the tiles. The lens is bonded to the stainless steel luminaire housing providing a sealed enclosure. LEDIA mounts into a recessed stainless steel subframe, which serves as a cable vault for making power connections. Color-changing RGB LEDS require remote 12v DC LED driver and 3-channel dimmer or sequencer.
Available Tile Sizes:
4" x 4" - LEDIA LF 04 RGB
8" x 8" - LEDIA LF 08 RGB
12" x 12" - LEDIA LF 12 RGB
16" x 16" - LEDIA LF 16 RGB
LEDIA FAMILY
LEDIA LL OUTDOOR
PRODUCT COLUMN
PRODUCT CATENARY
LEDIA LL WALL
LEDIA LF RGB
HOUSING
Tempered glass lens is 1'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is patterned with antislip squares produced from ceramic-based paint applied during the glass tempering process. Underside of lens is sandblasted and has matching square pattern screen-printed to the surface. LED light engine housing is constructed of stainless steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable hot-dip galvanized steel form for rough-in installation. Recessed frame and removable form may be pre-shipped upon request.
OPTICS
Low wattage LED's provide even illumination across the entire lens surface.
DELIVERED LUMENS
4" - LEDIA LF OD 04
WEIGHT: 6 lbs
Maximum power consumption: 5 watts
8" - LEDIA LF OD 08
WEIGHT: 15.4 lbs
Maximum power consumption: 13 watts
12" - LEDIA LF OD 12
WEIGHT: 32 lbs
Maximum power consumption: 16 watts
16" - LEDIA LF OD 16
WEIGHT: 51 lbs
Maximum power consumption: 25 watts
ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25C(-13F) and maximum ambient rating of 38C (100F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional 3 channel dimming module and RGB color sequencer, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
NOTE: Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology. Ingress Protection: IP67
CERTIFICATION
UL Listed for Wet Locations. Ingress Protection: IP67.
WARRANTY
Limited product warranty period including the LEDs is five years. LED power supply (ordered separately), optional 3- channel dimmer, and optional RGB color sequencer shall carry the respective manufacturer's limited warranty.
ORDER INFORMATION
Model
Length
04 - 4" x 4" | 08 - 8" x 8" | 12 - 12" x 12" | 16 - 16" x 16"
CCT
RGB - COLOR CHANGING
<product>
<oi model>