LEDIA LF

HOUSING
Tempered glass lens is 1'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is patterned with anti-slip squares produced from ceramic-based paint applied during the glass tempering process. Underside of lens is sandblasted and has matching square pattern screen-printed to the surface. LED light engine housing is constructed of stainless steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable hot-dip galvanized steel form for rough-in installation. Recessed frame and removable form may be pre-shipped upon request.

OPTICS
Low wattage LED's provide even illumination across the entire lens surface.

DELIVERED LUMENS
4" - LEDIA LF 04
WEIGHT: 6 lbs
DELIVERED LUMENS
3000K: 9 lumens
6500K: 12 lumens
BUG RATING
3000K: B0-U1-G0
6500K: B0-U2-G0

8" - LEDIA LF 08
WEIGHT: 15.4 lbs
DELIVERED LUMENS
3000K: 23 lumens
6500K: 30 lumens
BUG RATING
3000K: B0-U2-G0
6500K: B0-U2-G0

12" - LEDIA LF 12
WEIGHT: 32 lbs
DELIVERED LUMENS
3000K: 36 lumens
6500K: 48 lumens
BUG RATING
3000K: B0-U2-G0
6500K: B0-U2-G0

16" - LEDIA LF 16
WEIGHT: 51 lbs
DELIVERED LUMENS
3000K: 50 lumens
6500K: 66 lumens
BUG RATING
3000K: B0-U2-G0
6500K: B0-U3-G0


ELECTRICAL
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25C(-13F) and maximum ambient rating of 38C (100F). Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional dimming module, suitable for dry locations, is available and requires a 10v DC voltage controller (by others).

LAMPING
Total power consumption is 3 watts. Colors are available in red, blue, green, amber, warm white (3000K), and cool white (6500K).
NOTE: Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.

CERTIFICATION
UL Listed for Wet Locations. Ingress Protection: IP67.

WARRANTY
Limited product warranty period including the LEDs is five years. LED driver (ordered separately) and optional dimming module shall carry the respective manufacturer's limited warranty.