LEDIA LL WALL
LEDIA LL WALL
LEDIA LL WALL RGB
LED recessed wall strip adds definition to interior and exterior spaces by creating colorful architectural accents. The flush mounted glass strips are available in four lengths. Specially treated tempered glass lens diffuse light evenly across the surface. Luminaire mounts into recessed stainless steel backbox. LED colors are available in red, blue, green, amber, and white. Remote 12v DC LED driver is required.
Available Tile Sizes:
9" - LEDIA LL W 09
18" - LEDIA LL W 18
27" - LEDIA LL W 27
36" - LEDIA LL W 36
LEDIA LL OUTDOOR
LEDIA LF OUTDOOR
LEDIA LL WALL
Machined tempered glass lens is 0.75'' thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire with brushed stainless steel end brackets mounts into recessed stainless steel frame where electrical connections are made and secured in place with two countersunk screws for flush appearance. Recessed frame for rough-in installation may be preshipped upon request. Ingress Protection: IP67.
Low wattage LED's provide even illumination across the entire lens surface.
9" - LEDIA LL OD 09
3000K: 6 lumens
6500K: 7 lumens
WEIGHT: 3.3 lbs
Maximum power consumption: 4 watts
18" - LEDIA LL OD 18
3000K: 11 lumens
6500K: 13 lumens
WEIGHT: 6.6 lbs
Maximum power consumption: 6 watts
27" - LEDIA LL OD 27
3000K: 17 lumens
6500K: 20 lumens
WEIGHT: 9.9 lbs
Maximum power consumption: 9 watts
36" - LEDIA LL OD 36
3000K: 22 lumens
6500K: 26 lumens
WEIGHT: 13.2 lbs
Maximum power consumption: 10 watts
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F). Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional dimming module, suitable for dry locations, is available and requires a 10v DC voltage controller (by others).
NOTE: Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
Colors are available in red, blue, green, amber, warm white (3000K), and cool white (6500K)
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
UL Listed for Wet Locations. Ingress Protection: IP67.
Limited product warranty period including the LEDs is five years. LED driver (ordered separately) and optional dimming module shall carry the respective manufacturer's limited warranty.
09 - 9" | 18 - 18" | 27 - 27" | 36 - 36"
30K - 3000K | 65K - 6500K | R - Red | B - Blue | G - Green | A - Amber