IN-GROUND
LUMINAIRE

ACCADIA L Asymmetric

ACCADIA 900 L

ACCADIA 900 L

ACCADIA 600 L

ACCADIA 600 L

ACCADIA 300 L

ACCADIA 300 L

ACCADIA satisfies architectural facade lighting and accenting requirements through precision optics and refined styling. Clear tempered glass lens with black screen printing is bonded flush to the stainless steel luminaire housing, showing no visible hardware for an elegant appearance. High power, illumination grade LEDs paired with sophisticated facetted reflectors deliver uniform illumination free of striations. Asymmetric optics may be adjusted to one of four positions for optimal illumination of vertical surfaces and may be factory set on request. Fixed symmetric optics in a choice of beamspreads for uplighting are also available. Luminaire is prewired with cable to allow easy installation into the stainless steel installation box without opening the luminaire.

SIMILAR PRODUCTS

ACCADIA L Symmetric

ACCADIA L Symmetric

ACCADIA R Asymmetric

ACCADIA R Asymmetric

ACCADIA 900 L
HOUSING
Rectangular luminaire housing is fabricated from stainless steel and shows no visible welds. Housing is finished in matte black powder coat paint. Tempered glass lens with screen printing is bonded to the housing for a weather tight seal. Side access plate with gasketing is secured to luminaire with threaded fasteners to allow entry into the housing for servicing as needed. Housing is prewired with power cable and weather-tight strain relief bushing, eliminating the need to access the luminaire during installation. Luminaire installs into recessed stainless steel back box. All hardware is stainless steel.

OPTICS
Six precision facetted reflectors redirect light from individual high power LEDs to provide uniform illumination of vertical surfaces. The reflectors shield the individual diodes from normal viewing angles for improved visual comfort. Optics are factory set to one of four tilt angles (-10°, 0°, +10°, or +20°) to optimize illumination of vertical surfaces varying heights, while eliminating the need to access the luminaire during installation. Optics may be field adjusted if necessary.

ELECTRICAL
Luminaire is equipped with three LED drivers. Each electronic LED driver supplies 350mA drive current to two individual LEDs and has an input voltage range from 120v to 277v at 50/60Hz. Luminaire requires only a single power connection to operate. Total power consumption is 30 watts.

LED DELIVERED LUMEN OUTPUT*
Tilt Angle = 0°: 1695 lumens
Tilt Angle = -10°: 1425 lumens
Tilt Angle = +10°: 1965 lumens
Tilt Angle = +20°: 1959 lumens

* Lumen output is same for 3000K and 4000K color temperatures.

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

LUMINAIRE WEIGHT: 35 lbs
IP67

INSTALLATION
Luminaire installs into stainless steel back box. Back box with dummy cover may be pre-shipped in advance on request.

FINISH
Standard finish is finely textured matte black.

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

ACCADIA L Asymmetric
ACCADIA 900 L

ORDER INFORMATION

Model

ACL900A

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277

Mounting

R - Recessed

Beam

-10° Tilt, 0 Tilt, +10° Tilt, +20° Tilt

Finish

MB - Matte Black

Option

DIM - 0-10v Dimming, AS - Anti-slip lens

csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >