ACCADIA L Symmetric

HOUSING
Rectangular luminaire housing is fabricated from stainless steel and shows no visible welds. Housing is finished in matte black powder coat paint. Tempered glass lens with screen printing is bonded to the housing for a weather tight seal. Side access plate with gasketing is secured to luminaire with threaded fasteners to allow entry into the housing for servicing as needed. Housing is prewired with power cable and weather-tight strain relief bushing, eliminating the need to access the luminaire during installation. Luminaire installs into recessed stainless steel back box, which may be shipped in advance on request. All hardware is stainless steel.

OPTICS
Two (Accadia 300), four (Accadia 600), or six (Accadia 900) reflectors direct light upward from individual high power LEDs for uplighting. The reflectors are
facetted for improved visual comfort and uniform illumination. Optics are available in spot distribution with 7° beam angle or medium distribution with 26° beam angle.

ELECTRICAL
Luminaire is equipped with one LED driver per set of two individual LEDs. Driver has an input voltage range from 120v to 277v at 50/60Hz. Luminaire requires only a single power connection to operate. Total power consumption is 10 watts (Accadia 300), 20 watts (Accadia 600), or 30 watts (Accadia 900).

LED DELIVERED LUMEN OUTPUT
ACCADIA 300 ACCADIA 600 ACCADIA 900
Spot Beam 7° 1560 Lumens 3120 Lumens 4634 Lumens
Medium Beam 26° 691 Lumens 1380 Lumens 2074 Lumens
Lumen output is the same for 3000K and 4000K color temperatures.

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for current technical data.

CERTIFICATION
NRTL Certified

WEIGHT
Accadia 300: 13 Pounds
Accadia 600: 24 Pounds
Accadia 900: 35 Pounds

INGRESS PROTECTION
IP67

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.