ACCADIA R Asymmetric
ACCADIA R Asymmetric
ACCADIA satisfies architectural facade lighting and accenting requirements through precision optics and refined styling. Clear tempered glass lens with black screen printing is bonded flush to the stainless steel luminaire housing, showing no visible hardware for an elegant appearance. High power, illumination grade LEDs paired with sophisticated facetted reflectors deliver uniform illumination free of striations.
Asymmetric optics may be adjusted to one of four positions for optimal illumination of vertical surfaces and may be factory set on request. Fixed symmetric optics in a choice of beamspreads for uplighting are available. Luminaire is prewired with cable to allow easy installation into the stainless steel installation box without opening the luminaire.
SIMILAR PRODUCTS
ACCADIA R Symmetric
ACCADIA L Asymmetric
ACCADIA R Asymmetric
HOUSING
Round luminaire housing is fabricated from stainless steel and shows no visible welds. Housing is finished in matte black powder coat paint. Tempered glass lens with screen printing is bonded to the housing for a weather tight seal. Access plate with gasketing is secured to bottom of luminaire with threaded fasteners to allow entry into the housing for servicing as needed. Housing is prewired with power cable and weather-tight strain relief bushing, eliminating the need to access the luminaire during installation. Luminaire installs into recessed stainless steel back box, which may be shipped in advance on request. All hardware is stainless steel.
OPTICS
Two (Accadia 220) or four (Accadia 300) precision facetted reflectors redirect light from individual high power LEDs to provide uniform illumination of vertical surfaces. The reflectors shield the individual diodes from normal viewing angles for improved visual comfort. Optics are factory set to one of four tilt angles (-10°, 0°, +10°, or +20°) to optimize illumination of vertical surfaces varying heights, while eliminating the need to access the luminaire during installation. Optics may be field adjusted if necessary.
ELECTRICAL
Luminaire is equipped with one (Accadia 220) or two (Accadia 300) LED drivers. Driver has an input voltage range from 120v to 277v at 50/60Hz. Luminaire requires only a single power connection to operate. Total power consumption is 10 watts (Accadia 220) or 20 watts (Accadia 300).
LED DELIVERED LUMEN OUTPUT
ACCADIA 220 ACCADIA 300
Tilt Angle: -10° 475 Lumens 950 Lumens
Tilt Angle: 0° 565 Lumens 1130 Lumens
Tilt Angle: +10° 655 Lumens 1310 Lumens
Tilt Angle: +20° 653 Lumens 1306 Lumens
Lumen output is the same for 3000K and 4000K color temperatures.
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for current technical data.
CERTIFICATION
NRTL Certified
WEIGHT
Accadia 220: 16 Pounds
Accadia 300: 24 Pounds
INGRESS PROTECTION
IP67
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.


ORDER INFORMATION
Model
ACR220A - Accadia R 220 Asym | ACR300A - Accadia R 300 Asym
Color Temperature
30K - 3000K | 40K - 4000K
Control
ON-OFF - On/Off | DIM - 0-10v Dimming
Volt
UNV - 120-277
Beam
10F- -10° Tilt | STD- 0 Tilt | 10B- +10° Tilt | 20B- +20° Tilt
Finish
BL - Black
Option
ASL - Anti-Slip Lens



