TRENTO
TRENTO 900
TRENTO 500
TRENTO 275
Design simplicity and precision machining distinguish the TRENTO. Housing is constructed of high grade billet aluminum with satin anodized finish. Translucent acrylic lens creates a soft ambiance, while the matte acrylic top lens adds a contrasting lighting element. Heavy wall extruded aluminum shaft is finished in finely textured paint. Luminaire is available in three heights. All hardware is stainless steel.
TRENTO FAMILY
TRENTO WALL MOUNT
TRENTO 900 Bollard
HOUSING
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to bollard shaft with three concealed socket head cap screws. All hardware is stainless steel.
OPTICS
LED light engine consists of a single CoB diode centered within the cylindrical matte acrylic lens to direct light upward and outward to produce a Type V distribution.
ELECTRICAL
Electronic LED driver with input voltage range from 120v to 277v at 50/60Hz supplies 350mA drive current to the LED module. Total power consumption is 14 watts.
DELIVERED LUMENS / BUG RATING
3000K: 1050 lumens / B0-U4-G1
4000K: 1084 lumens / B0-U4-G1
NOTE:
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Trento 900 and Trento 500 bollard mounts to anchor base plate assembly with three M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of three 1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate andembedded as an assembly in concrete foundation (by others).
High security bollard mounting kit includes a hot-dip galvanized steel pipe and internal flange for installation of Trento 900 bollard. Trento 275 mounting kit includes a mounting kit with 3x 0.375" x 8" x 1.5" anchor bolts and a paper template.
FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WEIGHT
18 lbs
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
TR900 - 35.4" Bollard | TR900HS - 35.4" High Security Bollard
Mounting
N/A - Not applicable
Color Temperature
30K - 3000K | 40K - 4000K
Control
DIM - 0-10v Dimming
Volt
UNV - 120-277v
Top Lens Color
N/A - Not applicable
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
TVSS20 - 20KV Surge Suppressor
<product>
<oi model>