top of page

ILLUMINATING
BOLLARD

TRENTO

TRENTO 900
TRENTO 500
TRENTO 275

TRENTO 900

TRENTO 500

TRENTO 275

Design simplicity and precision machining distinguish the TRENTO. Housing is constructed of high grade billet aluminum with satin anodized finish. Translucent acrylic lens creates a soft ambiance, while the matte acrylic top lens adds a contrasting lighting element. Heavy wall extruded aluminum shaft is finished in finely textured paint. Luminaire is available in three heights. All hardware is stainless steel.

TRENTO FAMILY

TRENTO WALL MOUNT

TRENTO WALL MOUNT

TRENTO 275 Bollard

HOUSING
Housing consists of cylindrical matte acrylic lens retained by two lens rings mechanically fastened together with three internal aluminum support rods. Lens rings are precision-machined from 6082 billet aluminum, then satin anodized. Lens rings have machined groove for one-piece EPDM gasket to provide a weather-tight seal to the lens. Outer lens ring has circular aperture for diffused end lens. Tempered glass end lens is white flashed opal glass, sealed to the lens ring with one-piece closed cell silicone gasket. Luminaire mounts to bollard shaft with three concealed socket head cap screws. All hardware is stainless steel.

OPTICS
LED light engine consists of a single CoB diode centered within the cylindrical matte acrylic lens to direct light upward and outward to produce a Type V distribution.

ELECTRICAL
Electronic LED driver with input voltage range from 120v to 277v at 50/60Hz supplies 350mA drive current to the LED module. Total power consumption is 14 watts.

DELIVERED LUMENS / BUG RATING
3000K: 1050 lumens / B0-U4-G1
4000K: 1084 lumens / B0-U4-G1

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Bollard mounts to concrete foundation (by others) with three 3/8" x 8" x 1.5" anchors. See pole data sheet for mounting details

FINISH
Standard luminaire finish is satin anodized aluminum. Standard finishes for bollard shaft are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT
9 lbs

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

TRENTO 275
TRENTO 275

ORDER INFORMATION

Model

TR275 - 10.8" Bollard

Mounting

Color Temperature

30K - 3000K  |  40K - 4000K

Control

DIM - 0-10v Dimming

Volt

UNV - 120-277V

Finish

BL - Black  |  DB - Dark Bronze  |  DG - Dark Grey  |  GG - Graphite Grey  |  SG - Silver Grey  |  CC - Custom RAL Color

Option

TVSS20 - 20KV Surge Suppressor

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title

<product>

<oi model>

<product>

<oi model>

bottom of page