CENTO 360 - 900
CENTO 360 - 500
CENTO 360 - 280
A simple beacon with three windows for 360° illumination is the basis of CENTO's styling. Translucent acrylic lens creates soft diffused illumination. Housing is precision machined from heavy wall extruded aluminum. Housing and extruded aluminum shaft are finished in finely textured paint. Luminaire is available in three heights. All hardware is stainless steel.
CENTO WALL MOUNT
CENTO 500 - 360 LED
Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing with three lens apertures for 360° illumination is machined from tubing with nominal wall thickness of 0.60'' and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with three concealed socket head cap screws. All hardware is stainless steel.
LED light engine with electrical disconnect is top mounted to the machined aluminum top cap, which acts as a heat sink for thermal management. LED is positioned within the matte acrylic cylindrical lens providing 360-degree distribution through the housing apertures.
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA for standard output and 500 mA for high output models.
DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
Standard Output:18 watts
3000K: 469 lumens / B0-U3-G1
4000K: 505 lumens / B0-U3-G1
High Output: 28 watts
3000K: 667 lumens / B0-U3-G1
4000K: 830 lumens / B1-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Bollard mounts to anchor base plate assembly with three M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of three1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
LED - Standard, HP/LED - High Output
30K - 3000K, 40K - 4000K
UNV - 120-277V
N/A - Not applicable
D - Bollard
N/A - Not applicable
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
DIM - 0-10v Dimming