WALL
MOUNT

CENTO

CENTO 150W

CENTO 150W 360

A simple beacon is the basis of CENTO's styling. Translucent acrylic lens at 180° or 360° creates soft diffused illumination. Housing is precision machined from heavy wall extruded aluminum. Luminaire is finished in finely textured paint. Fixture may be mounted to wall or ceiling. All hardware is stainless steel.

®

Click for more information

CENTO FAMILY

CENTO COLUMN

CENTO BOLLARD

CENTO 150 Wall

HOUSING
Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing with 180-degree or 360-degree lens aperture is machined from tubing with nominal wall thickness of 0.60'' and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to surface over single gang switch box with factory supplied hardware and wall anchors. All hardware is stainless steel.

OPTICS
LED light engine with electrical disconnect is top mounted to the machined aluminum top cap, which acts as a heat sink for thermal management. LED is positioned within the matte acrylic cylindrical lens providing 180-degree or 360-degree distribution through housing aperture.

ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LEDs is 350 mA for standard output and 620 mA for high output models.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
STANDARD OUTPUT: 18 WATTS
3000K: 427 LMS / B0-U2-G1
4000K: 460 LMS / B0-U2-G1

HIGH OUTPUT: 28 WATTS
3000K: 607 LMS / B0-U2-G1
4000K: 756 LMS / B1-U2-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Cast aluminum wall bracket mounts over single gang switch box and is secured to surface in four places with factory supplied socket head lag screws and anchors. Optional adapter plate for mounting over 4'' octagon box is available upon request.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finishes are finely textured dark grey, graphite grey, silver grey, black, and dark bronze. Special RAL colors available on request.

WEIGHT: 10 lbs

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.