CANTO's smoothly engineered lines are also available for wall mounting. The dome shaped housing of heavy cast aluminum is available in two sizes to satisfy a variety of building scale requirements. Frameless tempered glass lens has single quarter-turn fastener for tool-less relamping. Hinged reflector assembly allows access to the ballast tray. Steel mounting bracket is hot-dip galvanized prior to being finished in high quality, finely textured paint. All hardware is stainless steel.
CANTO POLE MOUNT
CANTO 600 LVC
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Based on standard 5 degree tilt.
For 0 degree tilt option, U rating = 0.
Type II: 6795 lumens / B1-U1-G1
Type III: 6460 lumens / B2-U1-G1
Type IV: 6079 lumens / B1-U1-G2
Type II: 10193 lumens / B2-U1-G2
Type III: 9690 lumens / B2-U1-G2
Type IV: 9118 lumens / B2-U1-G2
Type II: 7378 lumens / B1-U1-G1
Type III: 7014 lumens / B2-U1-G1
Type IV: 6600 lumens / B1-U1-G2
Type II: 11068 lumens / B2-U1-G2
Type III: 10522 lumens / B2-U1-G2
Type IV: 9900 lumens / B2-U1-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.
Fabricated steel bracket arm is constructed from single formed steel plate and mounts over junction box to the surface in four places. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Mounting bracket is hot-dip galvanized, then lightly sanded prior to painting.
Housing is ultrasonically cleaned prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP65
UL Listed for Wet Locations
2LVC - 2 modules, 3LVC - 3 modules
WW - 3000K, NW - 4000K
UNV - 120-277V
T2 - Type II, T3 - Type III, T4 - Type IV
W - Wall Mount
N/A - Not Applicable
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
DIM - 0-10v Dimming, HSS - Houseside Shield, TVSS20 - 20KV Surge Suppressor, 0DEG - 0 degree tilt for full cutoff classification