®

RIVA 650 LED
HOUSING
One-piece luminaire base is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens with two guide pins twists and locks onto luminaire base and is secured with three button head cap screws. One-piece closed cell silicone gasketing provides a weather-tight seal. Luminaire base fastens to the one-piece cast aluminum tapered housing with three recessed setscrews and is sealed with one-piece closed cell silicone gasket. LED driver mounts to plate on the underside of the housing and housed in the top of the bracket. All hardware is stainless steel.

OPTICS
Single CoB LED is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.

ELECTRICAL
LED driver consumes 12.5 watts and is integral to the inverted taper wall bracket. Input voltage to driver is 110v thru 277v AC with 50-60 Hz. Driver shall be UL recognized.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 1387 LMS / B0-U4-G1
4000K: 1495 LMS / B0-U4-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Tapered cast aluminum housing with integral arm mounts over single gang switchbox and is secured to surface with four factory supplied socket head lag screws and anchors. Optional adapter plate to mount standard luminaire over 4'' octagon box is available upon request.

FINISH
Luminaire base is satin anodized aluminum. Standard finishes for cast aluminum housing are finely textured matte silver greymetallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT: 6 lbs

CERTIFICATION
UL Listed for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.