®

FERRARA 150 LED

HOUSING
Two 6060 aluminum alloy sidewalls attach to opposite sides of the square cast aluminum base with concealed hardware. Sidewalls are 0.60" thick and have two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has two white acrylic panels bonded to the outer surface to align the lens assembly to the luminaire. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to surface over single gang switch box with factory supplied hardware and wall anchors. All hardware is stainless steel.

OPTICS
Single COB LED directs light upward through matte acrylic lens producing soft diffused illumination.

ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LED is 450 mA. Power consumption is 16 watts.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
3000K: 597 LUMENS / B0-U3-G1
4000K: 643 LUMENS / B0-U3-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

WEIGHT: 8 lbs

CERTIFICATION
UL Listed for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.