®

CAMPO 450 Wall

HOUSING
Luminaire housing with integral ballast assembly is cast from high-grade aluminum alloy with heavy cooling fins to enhance heat dissipation. Door frame is one-piece cast aluminum and hinged for easy maintenance. Machined tempered glass lens is mechanically retained and bonded to the door frame forming a flush fit to the exterior surface. Door assembly is sealed with closed cell silicone gasketing and secured by two captive socket head cap screws. Reflector sail with integral ribbing is cast aluminum and supported by two cast aluminum stanchions. Stanchion mounting holes in the housing are machined and fitted with stainless steel helical thread inserts. Fabricated steel slip fitter bolts to housing with four socket head bolts. Slip fitter mounts to 1.8'' O.D. tenon and has built-in stop to limit insertion depth to 2.75''. Two offset rows of three recessed setscrews secure and level luminaire to the tenon. All hardware is stainless steel.

OPTICS
LED light engine consists of a vertically oriented optical quality acrylic rod capped with a reflective element to redirect light outward. The acrylic rod channels light from the single CoB LED and redirects it outward to provide effective horizontal and vertical illumination. Light shaping diffusing film on the inside of the main luminaire lens controls and shapes light distribution for optimal performance while minimizing brightness. Thermal management is provided via heat sinking and convective cooling within the sealed system.

ELECTRICAL
Electrical components are mounted in a white conical enclosure at the base of the luminaire. Electronic LED driver supplies 700mA drive current to the LED. The driver has a universal input voltage range from 120v to 277v at 50/60Hz. Driver is high power factor with performance greater than 90%. Power consumption is 24 watts. Optional 0-10v dimming available on request.

LED DELIVERED LUMENS / SYSTEM WATTS / BUG RATING
STANDARD OUTPUT: 28 WATTS
3000K: 1326 LMS / B0-U3-G2
4000K: 1644 LMS / B0-U3-G2

HIGH OUTPUT: 53 WATTS
3000K: 2040 LMS / B0-U3-G2
4000K: 2530 LMS / B0-U3-G3

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Tenon is 1.8'' O.D. and welded to square steel tubing with 0.118'' wall thickness. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.

FINISH
Housing is cleaned ultrasonically prior to painting. Standard Primar® finish is finely textured matte silver metallic, dark grey, graphite grey, black, or dark bronze. Special RAL colors available on request.

WEIGHT: 56 lbs

EPA: 3.9 SQ FT

INGRESS PROTECTION: IP54

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.