POLE
MOUNT

CANTO G

CANTO G 450 LVC

CANTO G 450 LVC

CANTO G 600 LVC

CANTO G 600 LVC

CANTO G 800

CANTO G 800

The smoothly engineered shape of the CANTO combined with its gracefully arching pole creates a unique appearance. The gentle curvature allows the pole to spatially define paths or roadways. Two luminaire sizes and three pole heights are available to meet proportional requirements of large or small scale applications. The heavy cast aluminum housing is fitted with a flat tempered glass lens with a quarter-turn fastener for easy relamping. Hinged reflector assembly allows access to the ballast tray. Mounting bracket and steel pole with flush handhole are hot-dip galvanized prior to being finished in high quality, finely textured paint. Base cover is spun aluminum. All hardware is stainless steel.

CANTO FAMILY

CANTO WALL MOUNT

CANTO WALL MOUNT

CANTO G 600 LVC
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.

OPTICS
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.

LED DELIVERED LUMEN OUTPUT / BUG RATING
Based on standard 5 degree tilt.
For 0 degree tilt option, U rating = 0.

3000K
2 Modules:
Type II: 6795 lumens / B1-U1-G1
Type III: 6460 lumens / B2-U1-G1
Type IV: 6079 lumens / B1-U1-G2

3 Modules:
Type II: 10193 lumens / B2-U1-G2
Type III: 9690 lumens / B2-U1-G2
Type IV: 9118 lumens / B2-U1-G2

4000K
2 Modules:
Type II: 7378 lumens / B1-U1-G1
Type III: 7014 lumens / B2-U1-G1
Type IV: 6600 lumens / B1-U1-G2

3 Modules:
Type II: 11068 lumens / B2-U1-G2
Type III: 10522 lumens / B2-U1-G2
Type IV: 9900 lumens / B2-U1-G2

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.

POLE
Fabricated aluminum bracket arm bolts to to the pole 3.5' from the top with two stainless steel fasteners. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole. Nominal pole height of 23'.

FINISH
Housing is ultrasonically cleaned prior to painting. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

INGRESS PROTECTION: IP65

CERTIFICATION
UL Listed for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

CANTO G 600 LVC
CANTO G 600 LVC

ORDER INFORMATION

Model

CC600G

LED Module

2LVC - 2 modules, 3LVC - 3 modules

Color Temperature

WW - 3000K, NW - 4000K

Volt

UNV - 120-277V

Distribution

T2 - Type II, T3 - Type III, T4 - Type IV

Mounting

A - Single Mount

Pole

23RC - 23' Round Curved

Pole Material

S - Steel

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

3PR - 3-pin NEMA photocontrol receptacle, 5PR - 5-pin NEMA photocontrol receptacle, 7PR - 7-pin NEMA photocontrol receptacle, DIM - 0-10V Dimming, GFCI - GCFI receptacle, HSS - House Side Shield, TVSS20 - 20KV Surge Suppressor, 0DEG - 0 degree tilt. Contact Factory for Motion Sensor.

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >