®

TANELLA
HOUSING
Tanella luminaires mount to saddle brackets integral to pole structure. Luminaire housing consists of a slotted cylinder fabricated from 6061 T6 aluminum welded to the machined aluminum driver enclosure above. Machined aluminum cover is secured to the driver enclosure with three captive stainless steel socket head cap screws and sealed with one-piece closed cell silicone gasketing. Clear acrylic cylindrical front lens mounts inside the slotted housing, providing colored accent when illuminated. Decorative anodized aluminum or Satin Ice acrylic louvers encircle the slotted housing and are attached with blind rivets to provide a floating appearance. Optional backlight accent in red, green, blue, or static white color temperatures features a frosted translucent acrylic lens. Two vertical aluminum struts welded to either side of luminaire act as wireway for power to luminaire. Cable entry on side of enclosure is sealed with weather-tight bushing. Luminaires are vertically and horizontally adjustable and may be installed facing forward or backward to the pole structure. Luminaires are locked into place with clamping mechanism after setting vertical aiming angle. All hardware is stainless steel.

OPTICS
Main light engine uses 3 mid-power COBs with individual precision optics. Choice of optics include super spot (12°), spot (25°), medium (35°), and wide (55°) distributions.

Cylindrical lens nested within the slotted housing casts a subtle glow to accentuate the luminaire. Honeycomb louvers and snoots are available separately.

ELECTRICAL
Integral universal electronic LED driver accepts input voltage range from 120v through 277v at 50/60Hz. Power consumption is 57 watts per luminaire. Power consumption for optional backlight is 4.5 watts.

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for more current technical data.

DELIVERED LUMENS
LED output is approximately 9000 lumens @ 3000K and will vary based on light distribution.

POLE
Wishbone pole structure is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing. Pole shall show no seam along shafts. Center pole is 5.5" O.D. with nominal wall thickness of 0.248''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1 /8" and includes triangular tamper-resistant locking device. Outer arched poles are 3" O.D. with nominal wall thickness of 0.346". Outer poles are welded to center pole in three places with horizontal crossbars. Additional horizontal crossbars along length of structure are 1.7" O.D. with nominal wall thickness of 0.125" and welded between arched poles. Brackets for luminaire mounting have saddles to support luminaire with clamping mechanisms to secure luminaire in place when vertical aiming adjustment is made. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 32'. Pole ships pre-wired with fish tape.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

INGRESS PROTECTION
IP54

EFFECTIVE PROJECTED AREA (EPA)
1.28 Square Feet

WEIGHT
18.8 Pounds per Luminaire

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years.
Driver shall carry the manufacturer's limited warranty.