®

ANGULAR
HOUSING
Rectangular luminaire housing with integral fitter is extruded 6061 aluminum with T6 temper and shows no visible welds. Self-contained light engine enclosure is watertight with a damp rated driver located at the rear of the module. Light engine enclosure features tool-free access for maintenance. Luminaire mounts to welded tenon on pole and is secured with three painted socket head cap screws on top of the housing. Luminaire is available in single or twin back-to-back mounting configurations. A bi-level system is also available. All hardware is stainless steel.

OPTICS
1 or 2 individual LED modules are available per luminaire arm. Each module consists of a field replaceable aluminum core PCB with 16 high-power LEDs with toolfree access. Light distributions include a choice of Type II, III, IV, or V optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+. Optional house side shields for the individual modules are available on request.

LED DELIVERED LUMEN OUTPUT
Single LED module produces up to 6,720 delivered lumens in 3000K.

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for current technical data.

ELECTRICAL
Each LED module is driven by an independent electronic driver. Input voltage range is 120v through 277v at 50/60Hz. Power consumption for individual light engine is 48 watts. 0-10v dimming drivers are standard.

POLE
Straight rectilinear pole is 6.3" x 3.9" nominal and manufactured from seamless 6061 aluminum tubing and heat treated to produce a T6 temper. Nominal wall thickness is 0.236". Sides of the shaft are flat with 1/8" radiused corners. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole shall show no seam along shaft. Two-piece base cover is fabricated aluminum. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Pole is available in two standard heights; 15', with a luminaire arm length of 2' 91/2", or 22', with a luminaire arm length of 3' 71/3". Maximum single-level aluminum pole height is 22'. Bi-level poles feature an upper luminaire arm length of 3' 71/3" and a lower arm length of 2' 91/2".

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.
Hess standard textured finishes feature proprietary PRIMAR® protective coating for long-term corrosion and UV protection.

CERTIFICATION
NRTL Certification Pending

INGRESS PROTECTION
IP65

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.