®

AMALFI 270 LED
HOUSING
One-piece cylindrical luminaire housing with integral cooling grooves and lens ring are precision-machined from 6082 billet aluminum, then satin anodized. Lens ring fits flush to the housing and retains the lens with three socket head cap screws. One-piece closed cell silicone gasketing provides a weather-tight seal when closed. Anodized spun aluminum shade is supported by four formed aluminum support struts welded to an attachment ring. Shade assembly mounts to the luminaire housing and is secured with four recessed setscrews. Housing fastens to an internal mounting plate in the pole top and is sealed to the pole with a one-piece closed-cell silicone gasket. Electrical components mount to plate on the underside of the housing and are housed in the top of the pole. All hardware is stainless steel.

OPTICS
Heat-resistant semi-spherical borosilicate lens has matte inner surface. COB LED with secondary optics directs light upward through the lens and reflected downward by the secondary spun aluminum reflector. CRI is greater than 80.

ELECTRICAL
Universal constant current LED driver accepts 90v through 305v input voltage at 47-63 Hz. Driver is high power factor greater than 96% with efficiency 79-84%. Driver delivers 620mA drive current to the LEDs. Driver shall be capable of starting from -20°C. Driver shall be UL Recognized. Power consumption is 24 watts.

DELIVERED LUMENS / BUG RATING
3000K: 1071 lumens - B0-U3-G1
4000K: 1328 lumens - B1-U3-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Internal flange mounting is standard. Optional external flange is available on request.

LUMINAIRE WEIGHT: 14 lbs

LUMINAIRE EPA: 0.7 sq ft

POLE WEIGHT
AM270: 105 lbs
AM360: 136 lbs

POLE
Inverted tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1 /8'' and includes triangular tamper-resistant locking device. Circular collar welded at the base of the pole provides transition between the round beveled flange plate and pole shaft. Luminaire mounting plate, welded inside the pole top, is drilled and tapped to accept fasteners for securing the luminaire. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 7.5' (AM270) and 10.4' (AM360). Pole mounts to anchor base plate assembly with four M12 x 20mm stainless steel socket head cap screws and washers.

Anchor base assembly consists of four 1 /2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).

FINISH
Standard PRIMAR® finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special RAL colors available on request.

CERTIFICATION: CSA/US Certified for Wet Locations

INGRESS PROTECTION: IP54

WARRANTY
Limited product warranty period is five years. Driver shall carry the manufacturer's limited warranty.