®

RENO LED
HOUSING
Rectangular column is fabricated from 0.2" nominal wall, 6060 aluminum extrusions and aluminum sheet. Hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Machined aluminum top cap provides access to LED engine with reflective optics located at top of column. Top cap is secured to column with four captive stainless steel socket head cap screws and is sealed to the housing with one-piece die-cut silicone gasket. Square lenses on main width of column and narrow rectilinear lenses on adjacent sides are textured matte acrylic.

OPTICS
Top mounted CoB LED and medium beam reflector projects light downward and outward through four lenses on the bollard. Interior of housing is painted white to provide even illumination through all four lenses. Two square lenses provide accenting, while two rectilinear lenses provide primary illumination.

ELECTRICAL
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz with total power consumption is 40 watts. 0-10v dimming available on request. Electronic driver is housed within a weatherproof enclosure that is accessed via the hand hole.

DELIVERED LUMEN OUTPUT / POWER CONSUMPTION / BUG RATING
Standard output: 40 watts
3000K - 2515 lumens / B1-U4-G2
4000K - 3119 lumens / B1-U5-G2

MOUNTING
Luminaire with internal flange mounts to four 3/4" x 17" x 3" galvanized steel anchor bolts. Nominal column height is 10.5'.

WEIGHT: 128 lbs

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.