CITY ELEMENTS 230
City Elements 230 offers design professionals the flexibility of a multi-purpose lighting system in a single architectural structure. The modularity of the light column system allows each column to be customized for area lighting, accenting, waymarking, or pathway illumination or a combination of several different functions. Modules are factory set as needed and accent optics are adjustable internally for highlighting and aiming. Heights range from low level bollards to columns up to thirty feet tall. Base elements are available in flanged or flangeless models. Optional modules are also available to accommodate security cameras or convenience outlets with in-use covers for remote power. Luminaire housings and extruded aluminum shaft with flush hand hole are finished in finely textured paint. All hardware is stainless steel.
Consult on-line Configurator (http://www.hess-configurator.com/cityelements_us/menu/html/index.html?lang=EN) for detailed technical specifications and information on CE180 for smaller diameter columns . CSA Certified for Wet Locations.
CITY ELEMENTS FAMILY
CITY ELEMENTS 180
CITY ELEMENTS 230 AS/BS300 LED
Luminaire housing with 120° polycarbonate window is fabricated from extruded 6061 aluminum. Access door at rear of housing provides access to optics and electrical gear and is sealed with single piece silicone gasket. Horizontal orientation of the luminaire housing is factory set to customer specification to meet site lighting requirements. All hardware is stainless steel.
Light engine consists of single CoB LED with reflector. Available distributions include 18°, 29°, or 55° symmetric distribution suitable for accenting or highlighting. Optics are vertically adjustable +/- 30° from horizontal and +/- 10° left or right within the housing. LED light source is available in 3000K or 4000K color temperatures with a CRI greater than 80.
Electronic LED driver provides 350mA drive current to the CoB LED. Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Power consumption is 11 watts. Power factor is greater than 0.95. Optional 0-10v dimming available on request.
18°: 888 lumens
29°: 938 lumens
55°: 865 lumens
18°: 936 lumens
29°: 989 lumens
55°: 911 lumens
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA/US Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
1LVC - 1 LEVO C Module
30K - 3000K, 40K - 4000K
UNV - 120-277V
T2 - Type II, T3 - Type III, T4 - Type IV
N/A - Not Applicable
SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color
3PR - 3-pin NEMA photocontrol receptacle, 5PR - 5-pin NEMA photocontrol receptacle, DIM - 0-10v Dimming, GFCI - GFCI Receptacle, HSS - House Side Sheild, TVSS20 - 20KV Surge Suppressor