CATENARY
SUSPENDED

PENDO

®

PENDO

PENDO presents a traditional European design in a simple yet functional catenary suspended luminaire. The housing with integral shade is fabricated from cast and spun aluminum components. An articulating cable hanger allows the fixture to be leveled when installed. Underside of shade is painted in high-reflectance white paint for increased efficiency. Clear acrylic lens twists and locks for tool-less relamping. Structural design, stainless steel cantenary cable, and fittings for mounting to support structure provided by others. All hardware is stainless steel.

PRODUCT COLUMN

PRODUCT CATENARY

PENDO LED SYMMETRIC

HOUSING
Luminaire housing with integral shade is spun aluminum. Clear acrylic cylindrical drop lens assembly twists onto the housing allowing tool-less access. Underside of the shade is painted white. Lens is sealed with single piece felt gasket to provide a weather tight seal. Power cable is sealed with weather-tight bushing at top of the luminaire. All hardware is stainless steel.

OPTICS
Self contained LED module with dome matte lens is positioned within the luminaire shade, producing a Type V distribution. CRI is 95.

ELECTRICAL
LED driver with universal input voltage capability of 120v through 277v consumes 43 watts at a drive current of 940mA. Driver efficiency is 87% with a power factor greater than 0.95. Standard 40' power cable length. Additional cable lengths over 40' available. Through-Wire Capable: Consult factory for through-wire customizations. Installation of electrical cables (by others) requires drip loop per applicable local and national electrical codes. Cable for drip loop installation is provided. Drip loop must be located near the fixture per local and national electrical codes.

DELIVERED LUMENS/ BUG RATING
Standard Model
3000K: 3645 lumens / B1-U1-G1
4000K: 3645 lumens / B1-U1-G1

NOTE:
Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Articulating cable hanger assembly is machined aluminum and is adjustable to level the luminaire. Cable hanger assembly will accommodate 1/4" - 1/2" diameter stainless steel cable. Structural design, stainless steel catenary and stabilization cables, and fittings for mounting to support structure provided by others. Consult factory for fitting suppliers.

WEIGHT
22 lbs
EPA: 1.1 sq ft

FINISH:
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.