®

HOUSING
Luminaire housing is machined and spun aluminum. Integral stainless steel mounting plate houses semi-recessed LED, electrical enclosure, lens, and shade. Mounting plate seals components using silicone gasketing material for an IP65 rated weathertight seal. All hardware is stainless steel.

MOUNTING
Luminaires are suspended via 1/16" 7x7 stainless steel aircraft cable span wires with ball ends. Luminaires hang from span wire via stainless steel hanging brackets located at the top of each luminaire. Hanging brackes hook luminaire to the span wire and are tightened, allowing individual luminaires to be removed and adjusted along the run as necessary. Span wire attaches to anchor point on each end which secures the system to poles, columns, or walls. Anchor points may accommodate up to 4 separate runs. See Page 3 for available anchor points; custom anchor points are available on request.
Span wire must be taut and shall not be bent or creased when mounting to pole or other structure. Recommended spacing is 6' from ends with a minimum distance of 3' between luminaires. Maximum recommended luminaires per run is 11.

OPTICS
Self contained LED module with cylindrical satinized acrylic lens is positioned within the luminaire shade, producing a Type V IESNA optical distribution. CRI is 80.

ELECTRICAL
Two constant voltage (24vdc) remote power supplies with enclosure are available: a 100-watt model, powering up to 11 luminaires, and a 60-watt model, which powers up to 9 standard output or 7 high output luminaires. A threaded female M8 3-pin connector is wired to the power supply and is mounted at the anchor point site. Patch cables supply power to luminaires along a run using one male and one female threaded connector featured on each luminare. Luminaires feature a separate 12v DC to DC UL rated driver mounted within electrical enclosure beneath the LED to deliver constant current for increased LED longevity. Standard output power consumption is 6 watts. High output consumes 8.4 watts.
Patch cables are available in 3 or 6-foot standard lengths or custom lengths on request. M8 threaded connectors are IP68 rated for a water-tight seal.

LED DELIVERED LUMENS / WATTS / BUG RATING
Standard Output
2700K - 576 Delivered Lumens / 6 Watts / B0-U2-G1
3000K - 619 Delivered Lumens / 6 Watts / B0-U2-G1
3500K - 619 Delivered Lumens / 6 Watts / B0-U2-G1
4000K - 656 Delivered Lumens / 6 Watts / B0-U2-G1

High Output
2700K - 806 Delivered Lumens / 8.4 Watts / B0-U3-G1
3000K - 866 Delivered Lumens / 8.4 Watts / B1-U3-G1
3500K - 866 Delivered Lumens / 8.4 Watts / B1-U3-G1
4000K - 918 Delivered Lumens / 8.4 Watts / B1-U3-G1

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica.
Consult factory for more current technical data.

FINISH
Luminaire is finished in finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. A standard white finish is provided beneath the luminaire on the optical surround. Special colors available on request.

WEIGHT / EPA
~0.7 Pound; EPA 0.93ft sq

CERTIFICATION
NRTL Certification Pending

WARRANTY
Limited product warranty period including LEDs is five years.