CATENARY
SUSPENDED

MICRO PENDO U0

®

MICRO PENDO U0

The Pendo Micro Luminaire System is a first-of-its-kind suspended luminaire system which provides a premium solution to increasingly popular design trends. Luminaires are durable machined and spun aluminum securely mounted to stainless steel aircraft cable. High-performance LED design language is a key feature, producing true Type II through V IESNA optical distributions with zero-uplight. Clear, flat glass lens can be rotated in increments of 90° to achieve house/street side orientation. Power is supplied by a remote-mounted 24vdc constant voltage power supply powering up to 11 luminaires per run. Patch cables are included for simple and water-resistant end-to-end electrical connections. Recommended spacing is 6' from ends and no more than 6' apart for optimal light coverage. Perfect for accent lighting in courtyards or other communal spaces, the Micro Luminaire System delivers performance and efficiency in a sleek, architecturally pleasing design.

PENDO FAMILY

MICRO PENDO

PRODUCT COLUMN

PRODUCT CATENARY

HOUSING
Luminaire housing is machined and spun aluminum. Integral stainless steel mounting plate houses semi-recessed LED, electrical enclosure, lens, and shade. Mounting plate seals components using silicone gasketing material for an IP65 rated weathertight seal. All hardware is stainless steel.

MOUNTING
Luminaires are suspended via 1/16" 7x7 stainless steel aircraft cable span wires with ball ends. Luminaires hang from span wire via stainless steel hanging brackets located at the top of each luminaire. Hanging brackes hook luminaire to the span wire and are tightened, allowing individual luminaires to be removed and adjusted along the run as necessary. Span wire attaches to anchor point on each end which secures the system to poles, columns, or walls. Anchor points may accommodate up to 4 separate runs. See Page 3 for available anchor points; custom anchor points are available on request.
Span wire must be taut and shall not be bent or creased when mounting to pole or other structure. Recommended spacing is 6' from ends with a minimum distance of 3' between luminaires. Maximum recommended luminaires per run is 11.

OPTICS
Self contained LED module with flat, clear glass lens is positioned within the luminaire, producing a Type V IESNA optical distribution. CRI is 80. U0 model produces zero uplight. Final photometry is pending.

ELECTRICAL
Two constant voltage (24vdc) remote power supplies with enclosure are available: a 100-watt model, powering up to 11 standard output or 8 high output luminaires, and a 60-watt model, which powers up to 7 standard output or 4 high output luminaires. A threaded female M8 3-pin connector is wired to the power supply and is mounted at the anchor point site. Patch cables supply power to luminaires along a run using one male and one female threaded connector featured on each luminare. Luminaires feature a separate 12v DC to DC UL rated driver mounted within electrical enclosure beneath the LED to deliver constant current for increased LED longevity. Standard output power consumption is 8.4 watts. High output consumes 12 watts.
Patch cables are available in 3 or 6-foot standard lengths or custom lengths on request. M8 threaded connectors are IP68 rated for a water-tight seal.

FINISH
Luminaire is finished in finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. A standard white finish is provided beneath the luminaire on the optical surround. Special colors available on request.
Hess standard textured finishes feature proprietary PRIMAR® protective coating for long-term corrosion and UV protection.

WEIGHT / EPA
~0.7 Pound; EPA 0.93ft2

CERTIFICATION
NRTL Certification Pending

INGRESS PROTECTION
IP65

WARRANTY
Limited product warranty period including LEDs is five years.
Driver shall carry the manufacturer's limited warranty.