CASSINO
CASSINO 900
CASSINO 500
CASSINO 290
CASSINO's simple lines enhance any site without diminishing the architecture. Translucent acrylic lens creates soft diffused illumination. Housing is constructed of cast aluminum and heavy aluminum plate. Fixture and heavy wall extruded aluminum shaft are finished in finely textured paint. Luminaire is available in three heights. All hardware is stainless steel.
CASSINO FAMILY
CASSINO WALL MOUNT
CASSINO 290 Bollard
HOUSING
Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60'' thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has single white acrylic panel bonded to the outer surface to align the lens assembly to the luminaire sidewall. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.
OPTICS
Single COB LED directs light upward through matte acrylic lens producing soft diffused illumination.
ELECTRICAL
Input voltage to universal LED driver is 120v through 277v AC, 50/60 Hz. Drive current to LED is 450 mA for 16 watt model and 620 mA for 24 watt model.
DELIVERED LUMENS / BUG RATING
Standard Output:16 watts
3000K: 642 lumens / B0-U3-G1
4000K: 699 lumens / B0-U4-G1
High Output: 24 watts
3000K: 917 lumens / B0-U4-G1
4000K: 1147 lumens / B0-U4-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Shaft is secured to concrete foundation (by others) with two concealed 3/8'' x 8'' x 1.5'' hot-dip galvanized anchor bolts and nuts. Luminaire is then installed to shaft with concealed stainless steel socket head cap screws.
FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
CS290 - 11.4" Bollard
Mounting
SO - Standard Output | HO - High Output
Color Temperature
30K - 3000K | 40K - 4000K
Control
DIM - 0-10v Dimming
Volt
UNV - 120-277V
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option