ILLUMINATING
BOLLARD

SIERRA Q

SIERRA Q

SIERRA Q

SIERRA QG

SIERRA QG

Sierra QG conveys contemporary design with its clean lines and square profile. Light is distributed evenly along the length of the translucent matte acrylic lens through direct and indirect internal reflectors. The extruded aluminum shaft features a horizontal cut at the transition to the lens. All hardware is stainless steel.

SIERRA FAMILY

SIERRA WALL MOUNT

SIERRA WALL MOUNT

SIERRA COLUMN

SIERRA COLUMN

SIERRA QG LED
HOUSING
Square profile base with bias cut at top of shaft is constructed from 0.118'' nominal wall aluminum tubing. Lens is impact-resistant matte acrylic. LEDs and driver are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.

OPTICS
Single chip-on-board (CoB) with reflective optics projects light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.

ELECTRICAL
Universal LED driver is mounted in a weather-proof enclosure at the base of the column.Input voltage to universal driver is 120v through 277v AC, 50/60 Hz. Maximum power consumption is 12 watts. LED driver supplies 350mA to LEDs.

LED OUTPUT / BUG RATING
3000K - 689 delivered lumens / B0-U3-G1
4000K - 780 delivered lumens / B0-U3-G1

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.

MOUNTING
Internal flange mounts to four 1/2" x 15" x 3" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others.

FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.

SIERRA QG
SIERRA QG

ORDER INFORMATION

Model

SE42QG

LED Module

N/A - Not applicable

Color Temperature

WW - 3000K, NW - 4000K, R - Red, B - Blue, G - Green, A - Amber

Volt

UNV - 120-277V

Distribution

N/A - Not applicable

Mounting

D - Bollard

Pole

39SB - 39" Square Bollard

Finish

SG - Silver Grey, GG - Graphite Grey, DG - Dark Grey, MB - Matte Black, DB - Dark Bronze, CC - Custom RAL Color

Option

Add a Title
Add a Title
Add a Title
Add a Title
Add a Title
Add a Title

csm_FARO_ProdHeader_544f6f75b8.png

< PRODUCT NAME >

< PRODUCT MODEL >