LINEA S
LINEA S 900
LINEA S 760
LINEA S 610
The slender profile of LINEA complements contemporary architecture with well proportioned styling and a modern form. The fabricated aluminum bollard is available as a single or twin mount luminaire in three different heights to meet varying scale requirements. The fully shielded luminaire emits zero uplight and is Dark Sky compliant. Concealed mounting minimizes the footprint. All hardware is stainless steel.
LINEA FAMILY
LINEA WALL MOUNT
LINEA POLE MOUNT
LINEA S 760 Bollard
HOUSING
Single piece bollard consisting of luminaire head and shaft is fabricated from 6061 aluminum extrusion showing no visible welds. Nominal wall thickness is 0.125" with rectangular cross-section of 6" x 2". LED light engine and driver are housed within a self contained power pack installed in the bollard head and is removable with a single tamper-proof fastener. The LED light engine is thermally managed using convection and heat transfer through the use of an aluminum heat sink and the luminaire housing. The lens is clear, impact resistant acrylic. Bollard is available in single or twin mount configurations. All hardware is stainless steel.
OPTICS
LED light engine consists of three high output, multi-chip LED arrays fitted with prismatic lens optics to produce a uniform asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits zero uplight at or above 90 degrees horizontal and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature may be 3000K or 4000K with CRI greater than 80.
ELECTRICAL
Integral LED driver is housed in luminaire head and consumes 11 watts at 350 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. High power factor LED driver shall be UL recognized.
LED DELIVERED LUMENS / BUG RATING
3000K - 479 delivered lumens / B0-U0-G1
4000K - 514 delivered lumens / B0-U0-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
MOUNTING
Flangeless bollard shaft slips over an integral tenon on the installation plate and is secured with stainless steel tamper-proof hardware to provide a stable mounting platform for the luminaire. Hardware for the installation plate includes hex nuts and washers for leveling and fastening, as well as three 1/2" hot-dip galvanized anchor bolts for embedment into a concrete foundation provided by others.
FINISH
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CERTIFICATION
CSA/US Certified for Wet Locations
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
ORDER INFORMATION
Model
LN760S - 30" Bollard
Mounting
S - Single Head | D - Double Head
Color Temperature
30K - 3000K | 40K - 4000K | A - Amber
Control
DIM - 0-10v Dimming
Volt
UNV - 120-277V
Finish
BL - Black | DB - Dark Bronze | DG - Dark Grey | GG - Graphite Grey | SG - Silver Grey | CC - Custom RAL Color
Option
BSS - Beach-side shield for single head amber LED bollards
ADDITIONAL FAMILY PRODUCTS
LINEA 950 BOLLARD
<product>
<oi model>