®

LINEA LED - Steel Housing
HOUSING
Single piece bollard consists of luminaire head and shaft fabricated from rectangular steel tubing with radiussed corners. Nominal wall thickness is 0.157" with cross-section of 7.1" x 3.1". LED light engine and driver are housed in self contained weather-proof powerpack enclosure within the bollard and removable with a single fastener. Lens is clear impact-resistant acrylic. LED array is thermally managed using convection and transmission of heat through the use of an aluminum heat sink and the luminaire housing. All hardware is stainless steel.

OPTICS
LED light engine consists of fifteen high output LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits zero uplight at or above 90 degrees horizontal and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature may be 3000K or 4000K.

ELECTRICAL
Integral LED driver is housed in luminaire head and consumes 10 watts at 350 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. LED driver shall be UL recognized.

LED DELIVERED LUMENS / BUG RATING
3000K - 251 delivered lumens / B0-U0-G1
4000K - 290 delivered lumens / B0-U0-G1

NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.

MOUNTING
Standard mounting is external flange with anchor bolts and mounting plate.

FINISH
Steel housing is is hot-dip galvanized inside and out prior to being finished in finely textured paint. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.

CERTIFICATION
CSA/US Certified for Wet Locations

WEIGHT
60 lbs

WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.